Full Product Manual

2
Application Note #669
www.lutron.com/support
®
Glossary
Dimmer Load . . . . . . . . . . . The light bulb(s) that the dimmer is controlling.
Fan Load . . . . . . . . . . . . . . The ceiling fan that the dimmer is controlling.
FASS . . . . . . . . . . . . . . . . . Tab at bottom of the product, required to be pulled out for light bulb(s) replacement and
entering Advanced Programming Mode (APM); also known as Air Gap.
Normal Operation . . . . . . . Standard use of dimmers or fan controls (ON / OFF, Raise / Lower); indicator lights will not be
blinking.
Slow Blink . . . . . . . . . . . . . Indication of entering APM, dimmer indicator lights (DILs) or fan indicator lights (FILs) blink
slowly at a rate of 4 flashes per second.
Fast Blink . . . . . . . . . . . . . . Indication of entering Programming settings, dimmer indicator lights (DILs) or fan indicator lights
(FILs) blink quickly at a rate of 8flashes per second.
Unlocked Preset . . . . . . . . A light level or fan speed setting that allows the device to turn ON to the last selected setting.
Locked Preset . . . . . . . . . . A programmable light level or fan speed setting to which the device will turn on to.
High-End Trim . . . . . . . . . . The highest achievable light level to which the device can be adjusted.
Low-End Trim . . . . . . . . . . The lowest achievable light level to which the device can be adjusted.
Default Setting. . . . . . . . . . Original preset programming settings to which the device is programmed upon initial use,
indicated by .
Factory Default . . . . . . . . . Original preset programming settings set up as a starting point for users; also known as Default
Setting.