Cut Sheet

RF Local Controls
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless® Designer-style: Maestro®
369143m 17 03.04.14
Multi-Location Fluorescent Dimmer Installation with Power Booster Dual Feed
2,3
MRF2-F6AN-DV with MA-R / MSC-AD and PHPM-3F-DV-WH, PHPM-PA-DV-WH, or PHPM-WBX-DV-WH
Companion Dimmer Dimmer
Brass
4
BlueBlue
Zone In
Black
Silver
Hot/Live
Dimmed Hot
Hot/Live
Brass
Black
NeutralNeutral
Neutral
Neutral
Ground
Ground
Green
Ground
Green
120 V~ 60 Hz
or
277 V~ 60 Hz
120 V~ 60 Hz
or
277 V~ 60 Hz
Load
Orange
Single-Location Fluorescent Dimmer Installation with Power Booster Dual Feed
MRF2-F6AN-DV with PHPM-3F-DV-WH, PHPM-PA-DV-WH, or PHPM-WBX-DV-WH
Dimmer
Brass
4
Blue
1
Zone In
Black
Silver
Hot/Live
Dimmed Hot
Hot/Live
NeutralNeutral
Neutral
Neutral
Ground
Ground
Green
120 V~ 60 Hz
or
277 V~ 60 Hz
120 V~ 60 Hz
or
277 V~ 60 Hz
Load
Orange
Wiring Diagrams (continued)
1
When using controls in single location installations, tighten the blue terminal. Do not connect the blue terminal to any other wiring or to ground.
2
Up to nine Maestro® Companion Dimmers may be connected to the Maestro Wireless® Dimmer. Total blue terminal wire length may be up to 250 ft (76 m).
3
Neutral-wire Dimmers must be connected on the Load side of a multi-location installation.
4
When using a PHPM, tighten the brass (Sw Hot) terminal of the MRF2-F6AN-DV. Do not connect the brass terminal to any other wiring or to ground.