Cut Sheet

ManualsBrandsLutron ManualsDimmers & Switches - WiredOCC/VAC Sensor Switch Dimmer, 8A, Maestro, Light Almond

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Maestro® Maestro 0–10 V Dimmer Sensor Sensor

369833a 1 08.27.14

MaestroR 0–10 V Dimmer Sensor

LutronR MaestroR 0–10 V dimmer sensors are lighting

controls with passive infrared sensors that automatically

control the lights in an area. These sensors detect heat

from occupants moving within an area to determine

when the space is occupied. The MaestroR 0–10 V

dimmer sensor combines a MaestroR 0–10 V dimmer

with an occupancy or vacancy sensor.

Features

• Controls 0–10 V- electronic fluorescent ballasts or

LED driver load types *

• Passive infrared motion detection with exclusive

LutronR XCTT Technology for fine motion detection

• 180˚ sensor field-of-view

• Up to 30 ft x 30 ft (9 m x 9 m) [900 ft

(81 m²)] major

motion coverage and 20 ft x 20 ft (6 m x 6m)

[400 ft

(36 m²)] minor motion coverage

• Occupancy version can be set to auto-on/auto-off or

manual-on/auto-off

• Vacancy version available to meet CA Title 24

requirements

• Adjustable timeout (1, 5, 15, or 30 minutes)

• Adjustable settings for auto-on light level (occupied

level): 100%, 50%, last light level, or locked preset

light level

• Adjustable sensitivity level: High, Med, Low, Min

• Off warning fades lights to off over a period of

10 seconds

• Advanced MaestroR dimmer features available (locked

preset, fade-to-on, and fade-to-off, etc.)

• Adaptive switching algorithm for extended relay life

• Smart ambient light detection (ALD)

• All models have single pole and 3-way capability

• Works with a single standard mechanical 3-way switch

or up to 9 companion switches (MA-AS or MSC-AS) **

• High-end trim and low-end trim to adjust maximum

and minimum light levels

• Selectable dimming curve—linear or square law

• Miswire and incompatible load alert

Models Available

Model Number *** Description Sensor Operation Maximum Capacity

MS-Z101-XX

Occupancy/vacancy

Single-pole/multi-location

Auto-on/auto-off or

manual-on/auto-off

8 A electronic fluorescent ballasts

or LED driver*

MS-Z101-V-XX

Vacancy

Single-pole/multi-location

Manual-on/auto-off ONLY

8 A electronic fluorescent ballasts

or LED driver*

* Works with all ballasts and drivers that provide a current source compliant to IEC 60629 Annex E.2.

** When using with standard mechanical 3-way switch, some rewiring is required. Not compatible with MA-R.

*** XX in model number represents color/finish code.

Summary of content (13 pages)

PAGE 1
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 1 08.27.14 MaestroR 0–10 V Dimmer Sensor LutronR MaestroR 0–10 V dimmer sensors are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect heat from occupants moving within an area to determine when the space is occupied. The MaestroR 0–10 V dimmer sensor combines a MaestroR 0–10 V dimmer with an occupancy or vacancy sensor.
PAGE 2
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 2 08.27.14 Specifications Regulatory Approvals • UL Listed to U.S. and Canadian safety requirements • Title 20/24 certified lighting control device – C omplies with Title 20 and Title 24 Section 110.9 Power • Operating voltage: 120–277 V~ 50/60 Hz • • • • Loads 8 A 0–10 V- electronic fluorescent ballasts or LED drivers Works with all ballasts and drivers that provide a current source compliant to IEC 60629 Annex E.
PAGE 3
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 3 08.27.14 Load Type and Capacity Control Neutral Vacancy 0-10 VConnection Only Current3,4 MS-Z101- Optional MS-Z101-V Optional 50 mA max sink  50mA max sink Voltage / Load Type / Maximum Load (Anywhere in Gang) 1 120–277 V~ Electronic fluorescent ballast or LED drivers, 8 A 120 V~ Fan 4.
PAGE 4
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 4 08.27.
PAGE 5
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 5 08.27.14 Custom Settings - Details Ambient Light Detection (ALD) mode Lights turn on only when natural light in the room is below the set threshold. ENABLED – Learning: The ambient light threshold adjusts to the user’s preference via manual interaction with the dimmer sensor.
PAGE 6
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 6 08.27.14 MaestroR 0–10 V Dimmer Sensor Placement and Operation • The ability of the dimmer sensor to detect motion requires line-of-sight of room occupants. The dimmer sensor must have an unobstructed view of the room. • Hot objects and moving air currents can affect the performance of the dimmer sensor. For best performance, the dimmer sensor should be mounted at least 4 ft (1.2 m) away from HVAC vents and light bulbs.
PAGE 7
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 7 08.27.14 Dimensions Operation Measurements shown as: in (mm) Side View Front View Coopersburg, PA 800.523.9466 lutron.com TURN OFF POWER ARRETEZ LE COURANT DESCONECT LA CORRIENTE Tap button (tap on / off) Up Programming LEDs Raise Timeout Button 411⁄16 (119) Alt 30 m 15 5 1 Lower Sensor Mode Button PIR Mode Hi Med Low Min Occ Lrn Fixd Vac 2 ⁄16 (75) 15 5/16 (8) 11⁄8 (30) Alt Sensor LED (behind lens) Pulses during Test mode.
PAGE 8
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 8 08.27.14 Wiring Diagrams Wiring Diagram 1A: Single Pole Wiring without Neutral Coopersburg, PA Black Line 120–277 V~ 50 / 60 Hz 800.523.9466 lutron.
PAGE 9
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 9 08.27.14 Wiring Diagrams (continued) Wiring Diagram 2A: 3-Way Wiring without Neutral and with Standard Mechanical Switch Coopersburg, PA Black 800.523.9466 lutron.
PAGE 10
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 10 08.27.14 3-Way Retrofit Installation For retrofit 3-way installations the mechanical switch needs to be rewired as shown in the diagram below after wiring the dimmer sensor. Otherwise, the 3-way installation will not work as expected. Single pole mechanical switches may also be used in a 3-way installation with MS-Z101 and MS-Z101-V models. 1.
PAGE 11
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 11 08.27.14 Multiple Location Wiring Diagrams Wiring Diagram 3A 120 V~ Multiple Location Installation without Neutral and with MaestroR Accessory Switches MA-AS or MSC-AS MA-AS or MSC-AS Blue Line/Hot Black Brass Blue Blue Black Brass 120 V~ 50 / 60 Hz Coopersburg, PA Black 800.523.9466 lutron.
PAGE 12
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 12 08.27.14 Multiple Location Wiring Diagrams (continued) Wiring Diagram 4A 220–277 V~ Multi-Location Installation without Neutral and with MaestroR Accessory Switches MA-AS-277 or MSC-AS-277 MA-AS-277 or MSC-AS-277 Blue Blue Line/Hot Black Red Blue Black Coopersburg, PA Black Red 220–277 V~ 50 / 60 Hz 800.523.9466 lutron.
PAGE 13
Maestro® Maestro 0–10 V Dimmer Sensor Sensor 369833a 13 08.27.