Cut Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro® Maestro 0–10 V Dimmer Sensor Sensor
369833a 4 08.27.14
Fade On Rate
• 15 sec
• 5 sec
• 2.5 sec
• 0.75 sec
Fade Off Rate
• 15 sec
• 5 sec
• 2.5 sec
• 0.75 sec
Preset Level*
• Locked–High range
• Locked–Med range
• Locked–Low range
• Locked–Min range
• Unlocked
– When the Preset Level is set to a “locked” level,
the dimmer will turn ON to the predetermined
“locked” level with a single tap of the Tap
button.
– When the Preset Level is set to “unlocked,” a
single tap of the Tap button will turn the dimmer
ON to the light level which it was adjusted to
the last time the light was on.
Low-End Trim*
• High range
• Med range
• Low range
• Min range
High-End Trim*
• High range
• Med range
• Low range
• Min range
* This setting is fully variable within each range.
Custom Settings
Default settings shown in bold
- Timeout
• 30 min
• 15 min
• 5 min
• 1 min
Mode - Sensor Modes
Lights automatically turn off in all sensor modes
• Occ -Occupancy mode (No ALD)
• Lrn - Occupancy with learning ALD mode
• Fixd - Occupancy with fixed ALD mode
• Vac - Vacancy mode (No ALD)
- Passive Infrared Sensitivity
• Hi
• Med
• Low
• Min
Additional Settings
Fixed ALD Light Level
• Hi
• Med
• Low *
• Min
* “Low” is the default setting for any sensor that is set by the user to:
Occupancy with fixed ALD mode
Manual Off-While-Occupied
• Enabled
• Disabled
Walk-Thru Mode
• Enabled
• Disabled
Occupied Level
A programmable setting that determines the light level
the dimmer sensor will turn on to, once occupancy
has been detected
• 100%
• 50%
• Preset Level
– When the Occupied Level is set to Preset Level, the
dimmer will automatically and manually turn on to the
selected Preset Level.