Specification Sheet
Table Of Contents
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro® Occupancy/Vacancy Sensor with C•L Dimmer Sensor
369748b 1 03.13.13
MaestroR Occupancy Sensor C•LR Dimmer
LutronR MaestroR occupancy sensor C•LR dimmers
are lighting controls with passive infrared sensors that
automatically control the lights in an area. These sensors
detect heat from occupants moving within an area to
determine when the space is occupied. The MaestroR
occupancy sensor C•LR dimmer combines a MaestroR
C•LR dimmer with an occupancy or vacancy sensor.
Features
• Controls CFL, LED, incandescent, and halogen
load types *
• Passive infrared motion detection with exclusive
LutronR XCTT Technology for fine motion detection
• 180˚ sensor field-of-view
• Up to 30 ft x 30 ft (9 m x 9 m) [900 ft
2
(81 m²)] major
motion coverage and 20 ft x 20 ft (6 m x 6m)
[400 ft
2
(36 m²)] minor motion coverage
• Occupancy version can be set to auto-on/auto-off or
manual-on/auto-off
• Vacancy version available to meet CA Title 24
requirements
• Adjustable timeout (1, 3, 5, 15, or 30 minutes) and
high/low sensitivity adjustment
Models Available
• Adjustable settings for auto-on light level (occupied
level): 100%, 50%, last light level, or locked preset
light level
• Off warning fades lights to off over a period of
10 seconds
• Advanced MaestroR dimmer features available (locked
preset, fade-to-on, and fade-to-off, etc.)
• All models have single pole and multi-location capability
• Works with a single standard mechanical 3-way switch
or up to 9 companion dimmers/switches (MA-R or
MSC-AD) **
Model Number *** Description Sensor Operation Maximum Capacity
MSCL-OP153M-XX
Occupancy/vacancy single-pole/
multi-location
Auto-on/auto-off or
manual-on/auto-off
600 W incandescent/halogen
150 W CFL/LED *
MSCL-VP153M-XX Vacancy single-pole/multi-location Manual-on/auto-off
600 W incandescent/halogen
150 W CFL/LED *
* For a complete list of compatible DIMMABLE CFLs and LEDs please visit www.lutron.com/dimcflled
** If using with standard mechanical 3-way switch, some rewiring and dimmer programming is required
*** XX in model number represents color/finish code
1