User Manual
Table Of Contents
- Maestro Occupancy/ Vacancy Sensor C•L Dimmer Models
- Overview
- Glossary
- Maestro Sensor Dimmer Coverage Area
- Maestro Sensor Dimmer Features in Programming Mode
- Dimming Features in Advanced Programming Mode
- Programming Mode
- Advanced Programming Mode
- Restoring Default Settings
- Two-Location Applications Using an Existing Switch
- Ambient Light Detection (ALD)
- Troubleshooting
- Maestro Sensor Dimmer Bulb Compatibility
- Lutron Contact Numbers
10
Application Note #480
www.lutron.com
®
Advanced Programming Mode (continued)
Programming Option 1: Preset Light Level
What it Does
Presets the dimmer to achieve a certain light level when the
T
button is pressed. If you prefer that the dimmer retains the
same light level every time you turn it ON, choose the Locked Preset. If you prefer that the dimmer returns to the light level
previously used when you turn it ON, choose the Unlocked Preset setting.
Note: Double-tapping the
T
button in Normal Operation mode will always bring the light level to maximum intensity.
Settings
There are two settings in Option 1: Preset Light Level.
Locked Preset
When programmed for a Locked Preset, the dimmer will always turn on to the predetermined locked level anytime the
dimmer is turned on with a single tap of the
T
button. If you want occupancy detection to turn on your lights to this locked
preset, set your Occupied Level to Preset per the instructions on page 7.
Unlocked Preset
When programmed for an Unlocked Preset, the dimmer will turn on to the light level to which it was previously adjusted.
Default Setting
Unlocked Preset (no ILs ON)
Locked Preset Directions
1. Enter Preset Light Level Menu: While in APM, press the
or button to select the first option, Programming
Option 1: Preset Light Level. Once IL 1 is blinking, press
the
T
button; the IL will switch to the current setting and
begin to blink rapidly or turn OFF.
2. Select Desired Locked Preset Light Level: Press the
or button to choose desired room light intensity.
The room light will become brighter or dim, reflecting the
Locked Preset level as the feature is adjusted.
3. Press the
T
button one time to set the Preset Light
Level and return to the APM main menu.
Note:
– If there is no button activity for 1 minute, the dimmer
will automatically exit APM and return to Normal
Operation.
Continued on next page…
To Exit any mode or programming step:
– Press and hold the
T
button for 5 seconds
or
– Pull the FASSTM out, then push the FASSTM back in
or
– Wait for 1 minute
IL 7: Brightest
IL 6
IL 5
IL 4
IL 3
IL 2
IL 1: Dimmest
Preset Light Level Menu
T
FASSTM