User Manual

Application Note #480
11 Technical Support — 800.523.9466
®
Advanced Programming Mode (continued)
Programming Option 1: Preset Light Level (continued)
Unlocked Preset Directions
To deactivate a Locked Preset setting so that the dimmer will turn on to the light level to which it was last set while in
Normal Operation, the Unlocked Preset must be activated.
1. Enter Preset Light Level Menu: While in APM, press the
or button to select the first option, Programming
Option 1: Preset Light Level. Once IL 1 is blinking,
press the
T
button; the IL will switch to the current
setting and begin to blink rapidly or turn OFF.
2. Select Unlocked Preset: Press the button until IL 1
is quickly flashing. Release the button and press and
hold the button again for approximately 3seconds or
until all ILs turn OFF.
Note: The light will remain at its minimum output when
you perform this action.
3. Press the
T
button one time to set the Preset Light
Level and return to the APM main menu.
Note:
– If there is no button activity for 1 minute, the dimmer
will automatically exit APM and return to Normal Operation.
Continued on next page…
IL 1
Preset Light Level
FASSTM
T
To Exit any mode or programming step:
– Press and hold the
T
button for 5 seconds
or
– Pull the FASSTM out, then push the FASSTM back in
or
– Wait for 1 minute