User Manual

12
Application Note #480
www.lutron.com
®
Advanced Programming Mode (continued)
Programming Option 2: Manual Fade ON Time
What it Does
Controls how quickly the lights will fade up when the dimmer is manually turned ON. If the light controlled by the dimmer
is the first or only light that will be turned ON in a particular room, most people prefer to use a faster time so that the room
is immediately illuminated. Art lighting or other accent lighting is often more pleasing with a slower fade time. The Fade ON
Time adjustment applies when the
T
button is pressed manually. All occupancy-based fade times are fixed.
Settings
The settings include fade times from OFF to Maximum Light Output in as quickly as 0.75 seconds and as slowly as
15seconds.
Default Setting
0.75 seconds (IL 1)
Directions
1. Enter Manual Fade ON Time Menu: While in APM,
press the or button to select the second option,
Programming Option 2: Manual Fade ON Time. Once IL
2 is blinking, press the
T
button.
2. Select Desired Manual Fade ON Time: Press the or
button to select the desired Manual Fade ON Time.
ILs 1–5 represent the different settings.
3. Press the
T
button one time to set the Manual Fade
ON Time and return to the APM main menu.
Notes:
– The fade times while pressing either the or
button during Normal Operation are not affected
by any Manual Fade ON Time modification. These
speeds are constant.
– The Manual Fade ON Times will be available only
when the lights are turned ON using a Maestro® Sensor Dimmer or a Companion Dimmer; when using a mechanical
switch in a 3-way application, the lights will fade ON and OFF at an accelerated rate.
– If there is no button activity for 1 minute, the dimmer will automatically exit APM and return to Normal Operation.
Continued on next page…
Or
IL 5: 15 seconds
IL 4: 5 seconds
IL 3: 3 seconds
IL 2: 2.5 seconds
IL 1: 0.75 seconds (Default)
Manual Fade ON Time
T
FASSTM
To Exit any mode or programming step:
– Press and hold the
T
button for 5 seconds
or
– Pull the FASSTM out, then push the FASSTM back in
or
– Wait for 1 minute