User Manual

Application Note #480
13 Technical Support — 800.523.9466
®
Advanced Programming Mode (continued)
Programming Option 3: Manual Fade OFF Time
What it Does
Controls how quickly the lights will fade down when the dimmer is turned OFF. A slower Manual Fade OFF Time is
suggested for rooms the user wishes to exit while the lights still provide illumination. Be aware that the light dimming
may not be immediately noticeable for settings of 5 seconds or longer. The Fade OFF Time adjustment applies when the
T
button is pressedn manually. All occupancy-based fade times are fixed.
Settings
The settings include fade times from Maximum Light Output to OFF in as quickly as 0.75 seconds and as slowly as
15seconds.
Default Setting
0.75 seconds (IL 1)
Directions
1. Enter Manual Fade OFF Time Menu: While in APM,
press the or button to select the third option,
Programming Option 3: Manual Fade OFF Time. Once
IL 3 is blinking, press the
T
button.
2. Select Desired Manual Fade OFF Time: Press the
or button to select the desired Manual Fade OFF
Time. ILs 1–5 represent the different settings.
3. Press the
T
button one time to set the Manual Fade
OFF Time and return to the APM main menu.
Notes:
– The fade times while pressing the or button
during Normal Operation are not affected by any
Manual Fade OFF Time modification. These speeds
are constant.
– The Manual Fade OFF Times will be available only
when the lights are turned ON using a Maestro® Sensor Dimmer or a Companion Dimmer. While using a mechanical
switch in a 3-way application, the lights will fade ON and OFF at an accelerated rate.
– If there is no button activity for 1 minute, the dimmer will automatically exit APM and return to Normal Operation.
Continued on next page…
Or
IL 5: 15 seconds
IL 4: 5 seconds
IL 3: 3 seconds
IL 2: 2.5 seconds
IL 1: 0.75 seconds (Default)
Manual Fade OFF Time
T
FASSTM
To Exit any mode or programming step:
– Press and hold the
T
button for 5 seconds
or
– Pull the FASSTM out, then push the FASSTM back in
or
– Wait for 1 minute