User Manual

14
Application Note #480
www.lutron.com
®
Advanced Programming Mode (continued)
Programming Option 4: Delayed Fade to OFF Time
What it Does
Controls how quickly/slowly the room lights start the dimming sequence after the
T
button is pressed. Longer Fade to
OFF Times are suggested for use in large rooms where the light control is opposite the exit and immediate dimming is not
wanted.
Settings
The settings included in the dimming sequence are from the time that the
T
button is pressed (Normal Operation) until the
room lights begin the Fade to OFF process.
Default Setting
30 seconds (IL 3)
Directions
1. Enter Delayed Fade to OFF Time Menu: While in APM,
press the or button to select the fourth option,
Programming Option 4: Delayed Fade to OFF Time.
Once IL 4 is blinking, press the
T
button.
2. Select Desired Delayed Fade to OFF Time: Press the
or button to select the desired Delayed Fade to
OFF Time. ILs 1–7 represent the different settings.
3. Press the
T
button one time to set the Delayed Fade
to OFF Time and return to the APM main menu.
Notes:
– To initiate the Delayed Fade to OFF feature in Normal
Operation, while the light is ON, press and hold the
T
button for one second and then release.
– If there is no button activity for 1 minute, the dimmer
will automatically exit APM and return to Normal
Operation.
Continued on next page…
IL 7: 70 seconds
IL 6: 60 seconds
IL 5: 50 seconds
IL 4: 40 seconds
IL 3: 30 seconds (Default)
IL 2: 20 seconds
IL 1: 10 seconds
Delayed Fade to OFF Time
Or
T
FASSTM
To Exit any mode or programming step:
– Press and hold the
T
button for 5 seconds
or
– Pull the FASSTM out, then push the FASSTM back in
or
– Wait for 1 minute