Specification Sheet

B3
www.lutron.com | 1.800.523.9466 |
Addendum | Custom Architectural Wallplates
How to construct a wallplate model number
Use the following steps to order multi-gang, metal, and replacement wallplates
1 product code
NT
Thin profile (D: 0.3 in or 7.6 mm)
Vareo®
Nova Ta®
Architectural
accessories
GRAFIK Eye
®
seeTouch
® wallstation
N
Wide profile (D: 0.65 in or 16.5 mm)
Nova
®
When ganging products together
under a common wallplate the
product‘s depth must be the same
style (NT or N).
2 insert code(s)
Inserts used in a fins broken application.
From left to right:
Nova Ta
® (small control)
Vareo
® (small control)
Nova Ta
® (large control)
Insert
The detachable face of the product is called
an insert. Each product has its own Insert Code,
see pgs. B5–B6 for a complete listing of model
numbers and their insert codes.
Select Insert Codes and add to model numbers
in left to right order as if looking at the front of the
wallplate (see example at the bottom of this page).
NT-SOL-FB-WH NT-SOL-FB-WH