Cut Sheet

Dimmer model numbers
Electronic low-voltage dimmers*
(small controls)
Slide-to-off dimmers
Single-pole NTELV-300-AA
2
120 V 300 W
Single-pole NTELV-600-AA
2
120 V 600 W
Only certain LED drivers are dimmable using
an ELV dimmer, for more information visit
www.lutron.com/LED.
3-wire fluorescent dimmers*
(small control)
Slide-to-off dimmers
Single-pole NTF-10-AA
2
120 V 16 A
Single-pole NTF-10-277-AA
2
277 V 8 A
Preset dimmers
3-way NTF-103P-AA
2
120 V 8A
3-way NTF-103P-277-AA
2
277 V 6A
For use with Hi-lume®, Hi-lume® Compact SE,
Hi-lume
® 3D, Eco-10®, EcoSystem® ballasts.
Also compatible with Hi-lume
® LED driver.
No derating required if ganged.
Adjustable low-end trim.
0-10 V dimmer (current sink control)
(small controls)
Slide-to-off dimmer
Single-pole NTFTV-AA
2
30 mA max control current
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
PowerPack: PP-120H, PP-277H or PP-347H.
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
For information on using Lutron dimmers to
control: Advance Mark VII dimming ballasts, visit
www.lutron.com/advance; Universal dimming
ballasts, visit www.lutron.com/universal.
No derating required if ganged.
Tu-Wire® fluorescent dimmers
(small controls)
Slide-to-off dimmers
Single-pole NTFTU-5A-AA
2
120 V 5 A
Single-pole* NTFTU-5A-277-AA
2
277 V 5 A
Also compatible with Advance Mark X
ballasts, for further information visit
www.lutron.com/advance.
For information on use with Universal and
OSRAM ballasts, contact Technical Support
at 1.800.523.9466.
For more information on Lutron ballasts, visit
www.lutron.com/ballasts.
All models must be derated if ganged unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
Nova Tb® dimmers, switches and fan controls
Architectural
wallplate opening
31
www.lutron.com | 1.800.523.9466 |
AA
2
: Architectural matte color codes, see pg. 27
(1-gang wallplate included)