Installation Guide

3
Set desired light level on dimmer
4
Press and hold “favorite” button on remote
Pico® remote control/plug-in lamp dimmer
Welcome—and thank you for purchasing a Caséta
Wireless dimming kit.
Before you install the plug-in lamp dimmer,
please watch the installation video at
www.casetawireless.com.
We hope you enjoy the convenience of Caséta Wireless!
LED—up to 100 W
CFL—up to 100 W
Halogen—up to 300 W
Incandescent—up to 300 W
Contents supplied
Double your warranty
Plug-in lamp dimmer
(PD-3PCL-WH)
Works with energy efficient
dimmable light bulbs:
Pico remote control
(PJ2-3BRL-WH-L01R)
Installing your lamp dimmer
1
Turn on the lamp
Love Caséta Wireless dimmers? Have ideas for
making them better? Tell us what you think and
we’ll extend your warranty by 1 year.
www.casetawireless.com/register.
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299, U.S.A.
Turn on the lamp you want to control and unplug it.
CAUTION
To avoid overheating and possible damage to other
equipment, do not use to control motor-driven
appliances, or transformer-supplied appliances.
Codes
Install in accordance with all national and local
electrical codes.
FCC/IC Information
This device complies with part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation. Modifications not expressly approved by Lutron Electronics Co.,
Inc. could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Warranty
For warranty information, please visit
www.casetawireless.com/warranty.
Lutron, , and Pico are registered trademarks and FASS and Caséta are
trademarks of Lutron Electronics Co., Inc. NEC is a registered trademark
of the National Fire Protection Association, Quincy, Massachusetts
© 2013 Lutron Electronics Co., Inc
P/N 030-1695 REV A
Go to www.casetawireless.com/support for
additional troubleshooting suggestions.
Symptoms Probable cause and action
Lamp does
not turn on or
lamp dimmer LED
does not light up.
• Light bulb(s) burned out.
• Lamp is turned off.
• Lamp is not plugged in.
Light does
not respond
to Pico remote
control.
• The dimmer failed to pair
with Pico remote control;
see Pairing the lamp dimmer
and Pico remote control.
• The dimmer is already at the
light level the Pico remote
control is sending.
• The Pico remote control
is outside the 30 ft (9 m)
operating range.
• The Pico remote control
batteries are low.
• The Pico remote control
batteries are installed
incorrectly.
• Bulbs turn off
while being
dimmed.
• Bulbs turn on at
high light level
but do not turn
on at a low
light level.
• Bulbs icker
or ash when
dimmed to a low
light level.
Verify bulbs are marked
dimmable and visit
www.casetawireless.com
for information on adjusting
the dimmer for best
bulb performance.
Troubleshooting
For advanced features, tips for using Caséta Wireless
dimmers with CFLs and LEDs, the complete Caséta
Wireless product line, and more, please visit
www.casetawireless.com.
Now that you’ve installed the plug-in lamp dimmer,
you can control your lights from either the dimmer
or the Pico remote control.
1
Press and hold “off” button on dimmer
Using your dimmer and remote control
Pairing the lamp dimmer and
Pico remote control
2
Press and hold “off” button on remote
x3
Changing the favorite light
level on the Pico remote
control (optional)
You can use the round “favorite”
button on the Pico remote control
to recall a favorite light level.
We’ve set it to 50%, but you can
change it to any level you like.
Favorite
Hold for 6 seconds
until LED
starts blinking.
Hold for 6 seconds until
lights ash 3 times.
Hold for 6 seconds until LED
blinks twice. New favorite
level is now saved.
x2
2
Connect the lamp(s)
Plug the lamp cord into either side of the Caséta
wireless plug-in dimmer.
NOTE: You can mix and match dimmable LED
and CFLs as well as halogen and incandescent
light bulbs with Caséta Wireless dimmers.
Dimmable LED and CFL light bulbs vary in their
dimming performance. If you’re using these
bulbs and they icker or turn off, please visit
www.casetawireless.com for information on
adjusting the dimmer for best bulb performance.
For a complete list of approved dimmable CFLs
and LEDs, please visit www.casetawireless.com.
Approved light bulbs include:
Cree
BA19-08027OMF-12DE26-1U100
Feit
A19/DM/LED
Philips
9290002295
9290002267
Sylvania
LED14A19/DIM/O/827
3
Plug in the lamp dimmer
Important note:
Use only with dimmable LED, dimmable CFL,
halogen, or incandescent lamps.
Do not exceed the total maximum wattage
shown below:
Bulb
Maximum
Wattage
LED &
CFL
100 W
or*
Incandescent &
Halogen
300 W
Repeat steps to pair other Pico controls.
Device Ratings
Plug-in Lamp Dimmer
PD-3PCL-WH
120 V~ 50/60 Hz
Remote control
PJ2-3BRL-L01R
3 V- 10 mA
(1) CR2032 battery (included)
Important notes:
1. For indoor use only.
2. Operate between 32 ˚F (0 ˚C) and 104 ˚F (40 ˚C).
If you want to control a second lamp turn it on
and plug it into the other side.
Using your controls
* For maximum wattage information
when mixing light bulb types see
www.casetawireless.com/support.
P/N 030-1695 REV A
Wireless
On
Off
Darker
Brighter
Plug-in lamp dimmer
Pico® remote control
On
Off
Darker
Favorite
“Brighter”
button with
raised icon
is easy to
find in
the dark
quick-start guide