Buying Guide

Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
3691195a 2 02.09.21
PD-15OUT-BLCaséta Wireless Outdoor Smart Plug
Specifications
Regulatory Approvals
• cULus Listed
• FCC approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
• Industry Canada certified
• IFTEL certified
• IP65 certified rating
Power
• Operating voltage: 120 V~ 50/60 Hz
• Operating current (with no load connected):
6.8 mA @ 120 V~
Key Design Features
• Tested to be certified to an Ingress Protection rating
of IP65 for dirt, dust, moisture, rain, sprinklers, hoses,
and snow.
• The Outdoor Smart Plug always operates locally and
does not require system control.
• Power failure memory: should power be interrupted,
the Outdoor Smart Plug will return to its previously set
On or Off state prior to the interruption when power
is restored.
• Multi-color indicator LED with status and
error reporting.
System Communications and Capacity
• The Caséta Wireless Outdoor Smart Plug
communicates with Pico remote controls, Caséta
motion sensors, and Lutron Smart Bridge or Smart
Bridge PRO through radio frequency (RF).
• The Caséta Wireless Outdoor Smart Plug minimum
operating distance is 60 ft (18 m) line-of-sight or 30 ft
(9 m) through walls when using Pico remote controls,
Caséta motion sensors, Lutron Smart Bridge, Lutron
Smart Bridge PRO, or Caséta Wireless repeater.
Device Limits
• Up to 10 Pico remote controls and 10 Caséta motion
sensors may be paired to each Caséta Wireless
Outdoor Smart Plug (with no Smart Bridge installed).
• Smart Bridge or Smart Bridge PRO system: up to
75total wireless devices (Caséta Wireless dimmers /
switches, Pico remote controls, Caséta motion
sensors, outdoor smart plugs) are supported per
system. Smart Bridge or Smart Bridge PRO counts
as one device. The Caséta Wireless repeater counts
as one device.
Environment
• Ambient operating temperature: -4 °F to 122 °F
(-20 °C to 50 °C), 0% to 100% humidity.
• Intended for outdoor use in all weather conditions.
See Installation Guide for how to properly install.
Must be used with a GFCI protected outlet.
Operation with a Pico Remote Control
Button Response
On Unit will turn the load on
Off Unit will turn the load off
Raise Unit does not respond
Lower Unit does not respond
Preset Unit will go the on or off state that was set with the
preset button
Note: Caséta Wireless systems have 2 button and 5 button
Pico remote controls and this table covers the operation for both
variants.
2