Information Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Load Controls
369987g 2 06.28.19
Specifications
Regulatory Approvals
• cULus Listed
• NOM Certified
• FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
• Industry Canada Certified
• IFTEL Certified
• NEMA 410 (-5ANS, -6ANS, -5WS, -10NXD, -5NE)
Power
Operating voltage:
• 120 V~ 50/60 Hz: -3PCL, -6WCL, -10NXD, -6ANS,
-5ANS, -5NE, -FSQN
• 120 / 277 V~ 50 / 60 Hz: -5WS-DV
Key Design Features
• Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with
IEC 61000-4-2.
• Tested to withstand surge voltages without damage
or loss of operation, in accordance with IEEE
C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
• Load controls always operate locally and do not
require system control.
• Power failure memory: should power be interrupted,
the control will return to its previously set level prior
to the interruption when power is restored.
• PD-5WS-DV, PD-5ANS, PD-6ANS, and PD-10NXD
use conventional 3-way wiring.
• Uses Lutron Claro wallplates or designer-style
wallplates from other manufacturers. Wallplates are
sold separately.
• Lutron Claro wallplates snap on with no visible
means of attachment.
• Requires a 1-gang U.S. wallbox. 3
1
⁄2 in (89 mm)
depth recommended, 2
1
⁄4 in (57 mm) depth
minimum
1
.
• Green status LED(s) to indicate load status.
• PD-FSQN provides 4 quiet fan speeds plus OFF for a
single ceiling fan.
System Communications and Capacity
• Caséta Wireless in-wall switches, dimmers, and fan
controls communicate with Pico remote controls,
Caséta motion sensors, and the Lutron Smart
Bridge / Smart Bridge PRO through Radio Frequency
(RF).
• The Caséta Wireless in-wall switches, dimmers,
and fan controls must be located within 60 ft (18 m)
line-of-sight or 30 ft (9 m) through walls of a Lutron
Smart Bridge, Smart Bridge PRO, or Caséta Wireless
Repeater.
• The Caséta Wireless in-wall switches, dimmers, and
fan controls must be located within 60 ft (18 m) line-
of-sight or 30 ft (9 m) through walls of Pico remote
controls or Caséta motion sensors (with no Smart
Bridge installed).
Device limits
• Pico remote controls and Caséta motion sensors: up
to 10devices (total) may be paired to each Caséta
Wireless in-wall switch / dimmer (with no Smart
Bridge installed).
• Smart Bridge or Smart Bridge PRO system: up
to 75total wireless devices (Caséta wireless
dimmers / switches, Pico remote controls, Caséta
motion sensors, and shades) are supported per
system. Smart Bridge or Smart Bridge PRO counts
as one device. The Caseta Wireless repeater counts
as one device.
Environment
• Ambient operating temperature: 32°F to 104°F
(0°C to 40°C), 0% to 90% humidity,
non-condensing. Indoor use only.
• PD-5WS-DV, PD-5ANS, PD-6ANS, and PD-10NXD
can be used with mechanical switch in 3-way
applications.
1
PD-FSQN requires 2` in (63` mm) minimum depth