Information Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Load Controls
369987g 5 06.28.19
1
Cannot be ganged.
2
Need to change load type to MLV. See www.casetawireless.com/change_phase
3
See bulb list at www.lutron.com/led
4
For PD-10NXD, a neutral connection is required for MLV loads, LED drivers, dimmable ballasts, and power modules (PHPM-PA, PHPM-3F, and GRX-TVI).
5
Compatible dimmable ballasts include Tu-Wire, Mark 10R, and PowerSenseR.
6
These loads are best operated using a forward-phase control. Consult https://www.casetawireless.com/support to ensure the appropriate phase for bulb
models used.
7
SSL7 compliant when in forward-phase.
8
Canadian packaged product.
9
Available in WH only.
10
Kit model number. Kit includes (1) PD-3PCL-WH, and (1) PJ2-3BRL-WH-L01R (3-button with raise / lower Pico wireless control in White).
11
Kit model number. Kit includes (1) L-BDG2-WH (Caséta Wireless Smart Bridge with HomeKit technology), (1) PD-3PCL-WH, (1) PJ2-3BRL-WH-L01R
(3-button with raise / lower Pico wireless control in White) and (1) L-PED1-WH (Single tabletop pedestal in White).
12
Kit model number. Kit includes (1) PD-6WCL-WH, (1) PJ2-3BRL-WH-L01R (3-button with raise / lower Pico wireless control in White), and (1) CW-1-WH
(single-gang faceplate in White).
13
Kit model number. Kit includes (1) L-BDG2-WH (Caséta Wireless Smart Bridge with HomeKit technology), (1) PD-6WCL-WH, (1) PJ2-3BRL-WH-L01R
(3-button with raise / lower Pico wireless control in White), and (1) CW-1-WH (single-gang faceplate in White).
14
Kit model number. Kit includes (1) L-BDG2-WH (Caséta Wireless Smart Bridge with HomeKit technology), (2) PD-6WCL-WH, (2) PJ2-3BRL-WH-L01R
(3-button with raise / lower Pico wireless control in White), (2) L-PED1-WH (Single tabletop pedestal in White) and (2) CW-1-WH (single-gang faceplate in White).
15
PRO Kit model number. Kit includes (1) L-BDGPRO2-WH (Caséta Wireless Smart Bridge PRO with HomeKit technology), (1) PD-6WCL-WH,
(1) PJ2-3BRL-WH-L01R (3-button with raise / lower Pico wireless control in White) and (1) CW-1-WH (single-gang faceplate in White).
Load Type and Capacity - Dimmers
Model Number Description Voltage Load Type
Minimum
Load
Maximum Load
Not Ganged End of Gang Middle of Gang
PD-10NXD
PD-10NXD-XX-C
8
Wireless
In-Wall
Dimmer
PRO (neutral
connection
required for
certain load
types)
4
120 V~
Incandescent / Halogen
10 W with
neutral (25 W
without neutral)
1000 W 800 W 600 W
MLV Halogen 10 W 1000 VA 800 VA 600 VA
MLV LED See Application Note #559
CFL / LED (120 V~
Rated)
3
1 bulb
3
250 W 250 W 250 W
Hi-lume 1% 2-Wire LED
drivers
1 driver 13 drivers 13 drivers 13 drivers
Dimmable Ballasts
5
1 ballast 1000 VA 800 VA 600 VA
PHPM-PA / 3F and
GR X-T VI
4
1 interface 3 interfaces 3 interfaces 3 interfaces
PD-3PCL
1, 9
PD-3PCL-WH-C
8
P-PKG1P-WH
9, 10
P-BDG-PKG2P
9, 11
Wireless
Plug-In
Lamp
Dimmer
120 V~
Incandescent / Halogen 10 W 300 W N/A N/A
CFL / LED (120 V~
Rated)
3
1 bulb
3
100 W N/A N/A
PD-5NE
PD-5NE-XX-C
8
Phase
Selectable
Dimmer
(neutral
connection
required)
120 V~
Incandescent / Halogen 10 W 500 W 400 W 300 W
CFL / LED
(120 V~ Rated)
3, 6, 7
1 bulb
3
250 W 250 W 250 W
MLV Halogen
2, 6, 7
10 W 400 VA 400 VA 400 VA
ELV Halogen 10 W 500 W 400 W 300 W
Hi-lume 1% 2-Wire LED
drivers
6, 7
1 driver 20 drivers 20 drivers 20 drivers
Dimmable Ballasts
5, 6, 7
1 ballast 400 VA 400 VA 400 VA
PHPM-PA / 3F and
GR X-T VI
6, 7
1 interface 3 interfaces 3 interfaces 3 interfaces
ELV LED See Application Note #559
MLV LED
6, 7
See Application Note #559
PD-6WCL
PD-6WCL-XX-C
8
P-PKG1W-WH
9, 12
P-BDG-PKG2W
9, 13
P-BDG-PKG2W
9, 14
P-BDGPRO-PKG1W
9, 15
Wireless
In-Wall
Dimmer
120 V~
Incandescent / Halogen 25 W 600 W 500 W 400 W
CFL / LED
(120 V~ Rated)
3
1 bulb
3
150 W 150 W 150 W