Information Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Load Controls
369987d 13 12.12.18
Wiring Diagrams - Switches (cont.)
1
When using controls without mechanical 3-way switch, cap the blue terminal. Do not connect the blue wire to any other wiring or to ground.
2
 ALUT-MLCensuresproperfunctionwhenLED,fluorescent,orELVloadsareused.InstalltheLUT-MLCinsidealoadfixtureorinaseparatejunctionbox
within the circuit.
3
The mechanical switch will need to be removed so the Pico remote control can be installed.
4
The red wire must be connected to the load and the black wire must be connected to Line/Hot. The switch will not work if the wires are reversed.
3-Way Installation (with Pico remote controls)
Option2:PJ2-2B-xxandwallboxmountingadapters(PICO-WBX-ADAPT)
(continuedonnextpage…)
BlackBlack
PD-5WS-DV
Pico
Remote
Control and
Wallbox
Mounting
Adapter
3
LUT-MLC
2
Load
Line/Hot
Neutral
Green
Ground
Black
Blue
1
120/277V~ 50/60 Hz
Travelers
PD-5WS-DV
Location 1 Location 2
13