Information Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Load Controls
369987d 2 12.12.18
Specifications
Regulatory Approvals
• cULusListed
• NOMCertified
• FCCApproved.ComplieswiththelimitsforaClassB
digital device, pursuant to Part 15 of the FCC Rules
• IndustryCanadaCertified
• IFTELCertified
• NEMA410(-5ANS, -6ANS,-5WS,-10NXD,-5NE)
Power
Operating voltage:
•120V~ 50/60 Hz: -3PCL, -6WCL, -10NXD, -6ANS,
-5ANS,-5NE,-FSQN
•120/277V~50/60Hz:-5WS-DV
Key Design Features
• Testedtowithstandelectrostaticdischargewithout
damage or memory loss, in accordance with
IEC61000-4-2.
• Testedtowithstandsurgevoltageswithoutdamage
orlossofoperation,inaccordancewithIEEE
C62.41-1991 Recommended Practice on Surge
VoltagesinLow-VoltageACPowerCircuits.
• Loadcontrolsalwaysoperatelocallyanddonot
require system control.
• Powerfailurememory:shouldpowerbeinterrupted,
the control will return to its previously set level prior
to the interruption when power is restored.
•
PD-5WS-DV,PD-5ANS, PD-6ANS, and PD-10NXD
use conventional 3-way wiring.
• UsesLutronClarowallplatesordesigner-style
wallplates from other manufacturers. Wallplates are
sold separately.
• LutronClarowallplatessnaponwithnovisible
means of attachment.
• Requiresa1-gangU.S.wallbox.3
1
⁄2 in (89 mm)
depth recommended, 2
1
⁄4 in (57 mm) depth
minimum
1
.
• GreenstatusLED(s)toindicateloadstatus.
• PD-FSQNprovides4quietfanspeedsplusOFFfora
single ceiling fan.
System Communications and Capacity
• CasétaWirelessin-wallswitches,dimmers,andfan
controls communicate with Pico remote controls and
the Lutron Smart Bridge/Smart Bridge PRO through
Radio Frequency (RF).
• TheCasétaWirelessin-wallswitches,dimmers,and
fan controls communicate with Lutron Radio Powr
Savr
cccupancy and vacancy sensors in a standalone
application. Sensors do not work with Smart Bridge
or Smart Bridge PRO.
• TheCasétaWirelessin-wallswitches,dimmers,
and fan controls must be located within 60ft (18m)
line-of-sight or 30ft (9m) through walls, of Pico
remote controls and Lutron Smart Bridge devices.
Device limits
• PicoremotecontrolsandRadioPowrSavr
occupancy sensors: up to 10devices (total) may
be paired to each Caséta Wireless in-wall switch/
dimmer (with no Smart Bridge installed).
• SmartBridgeorSmartBridge PRO system: up to
50total wireless devices (Caséta wireless dimmers/
switches, Pico remote controls, and shades) are
supported per system. Smart Bridge or Smart Bridge
PRO counts as one device.
Environment
• Ambientoperatingtemperature:32°Fto104°F
(0°Cto40°C),0%to90%humidity,
non-condensing. Indoor use only.
•
PD-5WS-DV,PD-5ANS, PD-6ANS, and PD-10NXD
can be used with mechanical switch in 3-way
applications.
1
PD-FSQNrequires2` in minimum depth
2