Cut Sheet

ManualsBrandsLutron ManualsLightingVive PowPak Phase Select Dimming Module

Table Of Contents

Copy of pdfformfields_file_11pages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive

PowPak Phase Select Wireless Lighting Control

3691150b 1 03.25.21

Vive PowPak Phase Select

Dimming Module

The Vive PowPak phase select dimming module is a

radio frequency (RF) control that operates phase

control fluorescent ballasts or LED drivers based on

input from Pico remote controls and RadioPowr Savr

sensors. The PowPak module is ideal for small areas

(e.g., classrooms, conference rooms, private offices).

Communication with RF input devices (e.g., Pico

remote controls, Radio Powr Savr sensors) is

accomplished by using Lutron Clear Connect – Type A

RF Technology.

These products are also compatible with the Vive

hub which enables an app-based simple setup

process using a standard web browser on any Wi-Fi

enabled phone, tablet or computer. It also enables

control and monitoring of all Vive devices. The Vive

hub can be added at any time. System

reprogramming will be required. For a complete list of

features supported with the Vive hub, see

specification submittal 369902 at www.lutron.com

Features

• 120 / 277 V~ voltage phase control dimming for all

phase control load types.

• Model (RMJS-PNE-DV-EM) available for use with

emergency lighting. See page 6 for operating details.

• Configurable high- and low-end trim

• Phase selectable (non-automatic): Operates in reverse-

phase mode by default. Can be changed to forward-

phase mode using button presses or the Vive app.

• PRO LED

is Lutron’s industry-leading technology

which enables either forward or reverse-phase

control for optimal dimming down to as low as 1%

(dependent on the driver’s capabilities).

• RTISS technology compensates for incoming

line variations such as frequency shifts (up to +/- 2%

change in frequency / second), harmonics and

line noise.

• RTISS-ICM technology is able to withstand high

inrush LEDs, bulb blowouts, and direct shorts.

See App Note #628 (P/N 048628) on www.lutron.com for emergency lighting applications.

RMJS-PNE-DV (shown)

• Integral protection for common temporary over-

current and over-voltage conditions.

• LEDs on the PowPak module provide diagnostic

information. See App Note #781 (P/N 048781) on

www.lutron.com for more information.

• Buttons on the PowPak module provide override control.

• 10-year power failure memory automatically returns

the outputs to the levels they were set to prior to a

power outage.

• NEMA SSL 7A-2015 compliant for compatibility with

solid state lighting.

• Receives wireless inputs from up to 10 Pico remote

controls, 10 Radio Powr Savr occupancy / vacancy

sensors, and 1 Radio Powr Savr daylight sensor

Utilizes Lutron Clear Connect – Type A RF

Technology (see frequency range on page 2).

• Mounts in a standard metal 4 in x 4 in (101.6 mm x

101.6 mm) junction box.

Summary of content (9 pages)

PAGE 1
Vive PowPak Phase Select Wireless Lighting Control 3691150b 1 03.25.21 Vive PowPak Phase Select Dimming Module The Vive PowPak phase select dimming module is a radio frequency (RF) control that operates phase control fluorescent ballasts or LED drivers based on input from Pico remote controls and Radio Powr Savr sensors. The PowPak module is ideal for small areas (e.g., classrooms, conference rooms, private offices). Communication with RF input devices (e.g.
PAGE 2
Vive PowPak Phase Select Wireless Lighting Control 3691150b 2 03.25.21 Models Model Number RMJS-PNE-DV RMJS-PNE-DV-EM Region U.S.A., Canada, Mexico U.S.A., Canada, Mexico Operating Voltage 120 / 277 V~ 120 / 277 V~ Frequency Band 431.0 –437.0 MHz 431.0 –437.0 MHz For more information, see the following documents: Application note: http://www.lutron.com/TechnicalDocumentLibrary/048781.pdf Installation guide: http://www.lutron.
PAGE 3
Vive PowPak Phase Select Wireless Lighting Control 3691150b 3 03.25.21 Specifications Regulatory Approvals • cULus 508 Listed • Complies with the limits for a Class B device, pursuant to IC and FCC rules • Complies with requirements for use in other spaces used for environmental air (plenums) per NEC® 2014 300.
PAGE 4
Vive PowPak Phase Select Wireless Lighting Control 3691150b 4 03.25.
PAGE 5
Vive PowPak Phase Select Wireless Lighting Control 3691150b 5 03.25.21 Specifications (continued) Default Operation Mounting • T his device must be fully installed into a metal junction box using two screws. The device must be mounted such that the backcover is inside the 4 in x 4 in (101.6 mm x 101.6 mm) junction box and the front faceplate is outside the 4 in x 4 in (101.6 mm x 101.6 mm) junction box. Adding an extension ring is recommended for junction box depth extension.
PAGE 6
Vive PowPak Phase Select Wireless Lighting Control 3691150b 6 03.25.21 RMJS-PNE-DV-EM Sequence of Operation With a Vive hub: Without a Vive hub: • Normal mode: The RMJS-PNE-DV-EM can dim loads as normal and respond to local button presses, Pico remote controls, occupancy sensors, daylight sensors, timeclock events and preset scene calls.
PAGE 7
Vive PowPak Phase Select Wireless Lighting Control 3691150b 7 03.25.21 Advanced Configurations Pico Remote Controls • Supports up to 10 Pico remote controls. • Separate favorite levels can be set for each Pico remote control. (NOTE: The bottom button on a Pico remote is always full OFF). Radio Powr Savr Daylight Sensor • Supports up to one Radio Powr Savr daylight sensor • The Radio Powr Savr daylight sensor will affect lighting fixtures equally.
PAGE 8
Vive PowPak Phase Select Wireless Lighting Control 3691150b 8 03.25.
PAGE 9
Vive PowPak Phase Select Wireless Lighting Control 3691150b 9 03.25.21 Dimensions Dimensions are shown as: in (mm) 3.37 (85.75) 4.53 4.53 (114.90) (114.90) 4.53 4.53 (114.90) (114.90) 1.80 (45.60) 1.90 (48.20) 3.37 (85.75) Range Diagram PowPak Module Contact Lutron first for applications using foil-backed or metallic ceiling tiles. 60 ft (18 m) maximum line of sight PowPak module 50 ft (15.