Cut Sheet

ManualsBrandsLutron ManualsDimmers & Switches - WiredRadioRA 2 Plug-in Module

Lutron®

1www.lutron.com/radiora2

product speciﬁcations

12.01.10

369-246b

RadioRA 2 RF Plug-in Modules are simple to

install and easy to use. RF Plug-in Modules allow

floor and table lamps (RR-3PD-1) as well as

general purpose switching loads (RR-15APS-1)

to be added to a system quickly and easily using

Clear Connect

TM RF Technology. They can be

hidden behind furniture or appliances.

The RadioRA 2 Dimming Module (RR-3PD-1)

functions much like standard lamp dimmers, but

also incorporates advanced features such as

fade on/fade off, delayed long fade off, and rapid

full on.

The RadioRA 2 Appliance Module (RR-15APS-1)

switches up to 15 A of general purpose loads.

It features Lutron’s patented Softswitch

technology to prevent the relay contacts from

arcing, extending the average life of the switch.

Model Numbers

RR-3PD-1-XX* 300 W / 300 VA Dimming

Module (1 receptacle)

RR-15APS-1-XX* 1/2 HP or 15 A General

Purpose Plug-In Appliance

Module (1 receptacle)

*See Colors and Finishes below.

RadioRA 2 RF Plug-In Modules

RR-3PD-1

Colors and Finishes

RadioRA 2 RF Plug-In Modules are available in

2 colors.

Midnight

Snow

RR-15APS-1

Summary of content (5 pages)

PAGE 1
product specifications 369-246b 12.01.10 RadioRA 2 RF Plug-In Modules RadioRA 2 RF Plug-in Modules are simple to install and easy to use. RF Plug-in Modules allow floor and table lamps (RR-3PD-1) as well as general purpose switching loads (RR-15APS-1) to be added to a system quickly and easily using Clear ConnectTM RF Technology. They can be hidden behind furniture or appliances.
PAGE 2
product specifications 369-246b 12.01.10 RadioRA 2 RF Plug-In Modules Specifications Model Numbers RR-3PD-1-XX, RR-15APS-1-XX Power 120 V Typical Power Consumption 0.3 W Test conditions: load is off. Regulatory Approvals cUL, UL, FCC, IC, SCT, NOM (-3PD only; -15APS pending) Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
PAGE 3
product specifications 12.01.10 369-246b RadioRA 2 RF Plug-In Modules Dimensions All dimensions are shown as in unless otherwise noted. Images below are for reference only.
PAGE 4
product specifications 12.01.10 369-246b RadioRA 2 RF Plug-In Modules Installation Plug the load cord into a Plug-In Module receptacle. Insert the plug of the Plug-In Module into the wall outlet. Wall Outlet Plug-In Module Plug-In Module Plug Load Cord Plug-In Module Receptacle NOTE: The Plug-In Dimming Module contains a POLARIZED cord set. It has a polarized plug (one blade is wider than the other) and outlet (one slot is wider than the other).
PAGE 5
product specifications 369-246b 12.01.10 RadioRA 2 RF Plug-In Modules Operation Dimming Module (RR-3PD-1) COOPERSBURG, PA 18036 USA ® RR-3PD-1 120 V I H 50 / 60 Hz 300 W 300 VA / 200 W Status LEDs Indicate light level; glow softly as night light when load is off Raise Button Press to brighten Lower Button Press to dim Toggle Button Press to toggle ON / OFF; double-tap for full ON; press and hold while ON for delayed long fade to OFF.