User Manual

3691062b 2 01.31.18
Main Repeater
RR-SEL-REP2
RA2 Select
®
Page
SPECIFICATION SUBMITTAL
Job Name:
Job Number:
Model Numbers:
Regulatory Approvals
• cULus Listed
• FCC approved. Complies with the limits of a Class B
digital device, pursuant to Part 15 of the FCC rules
• IC certified
• COFETEL certified (Q3 2017)
Power
• 5 V- 300 mA
• Power Supply (included): 5 V- 550 mA, cable length
6 ft (1.83 m)
Typical Power Consumption
•
RA2 Select main repeater: 1.3 W
•
Test Conditions: LED on, Ethernet cable plugged in,
powered by the 5 V- adapter
Environment
• Ambient operating temperature:
32 °F to 104 °F (0 °C to 40 °C)
• 0% to 90% humidity, non-condensing
• Indoor use only
Communications
• All devices must be located within 30 ft (9 m) of
a repeater
• All repeaters must be located within 60 ft (18 m) of
another repeater
• System devices operate on frequencies between
431.0 MHz to 437.0 MHz
• Internet connection required for initial setup and
to maintain system date/time and receive periodic
firmware updates
Specifications
Protection
• Tested to withstand electrostatic discharge without
damage or memory loss in accordance with
IEC 61000-4-2
• Tested to withstand surge voltages without damage or
loss of operation, in accordance with
IEEE C62.41-1991
Power Failure Memory
• Should power be interrupted, the RA2 Select main
repeater will return to its previous state when power is
restored
Connections
• Ethernet: 3 ft (0.92 m) cable included (for internet and
Lutron App connection)
• USB (power only)
2