Information Sheet

product specifications
12.01.17369225m
RadioRA 2 Maestro Local Controls
4
Customer Assistance:
1.844.LUTRON1 (U.S.A. / Canada)www.lutron.com/support
Specifications
Model Numbers Dimmer: RRD-6CL, RRD-6D, RRD-6ND, RRD-10D, RRD-10ND, RRD-6NA, RRD-F6AN-DV
Switch: RRD-8ANS, RRD-8S-DV
Fan Speed Control: RRD-2ANF
Remote: RD-RD, RD-RS, RD-RD-277, RD-RS-277
Power 120 V~ 50/60 Hz: -6CL, -6D, -6ND, -10D, -10ND, -6NA, -2ANF, -8ANS, -RD, -RS
120 – 277 V~ 50 / 60 Hz: -F6AN-DV, -8S-DV
277 V~ 50/60 Hz: -RD-277, -RS-277
Typical Power
Consumption
Dimmer / Switch / Fan Speed Control: 0.6 W
Test conditions: load is off and nightlight mode is enabled.
Remote Dimmer / Switch: 0 W
Test conditions: load is off.
Regulatory
Approvals
UL, CSA (all except -6CL and -6NA), cUL (-6CL and -6NA only), NOM, FCC, IC,
COFETEL, ANATEL (all except -6ND, -6NA and Remotes)
Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity,
non-condensing. Indoor use only.
Communications Dimmers and switches communicate with the system through Radio Frequency (RF)
and must be located within 30 ft (9 m) of a repeater. Remote dimmers/switches are not
required to be within a specific range of a repeater. System devices operate on frequencies
between 431.0 MHz and 437.0 MHz.
ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in
accordance with IEC 61000-4-2.
Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance
with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC
Power Circuits.
Power Failure Power failure memory: should power be interrupted, the control will return to its previous
state when power is restored.
Mounting Requires a U.S. wallbox. 3 ½ in (89 mm) deep recommended, 2 ¼ in (57 mm) deep
minimum.
Wiring Uses conventional 3-way and 4-way wiring.
Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf