Information Sheet

product specifications
02.10.20369225r
RadioRA 2 RF Maestro Local Controls
10
Customer Assistance:
1.844.LUTRON1 (U.S.A. / Canada)www.lutron.com/support
Mixing Lamp Types
Mixing lamp types (using a combination of CFL / LED, Incandescent / Halogen bulbs) and ganging
with other dimmers or electronic switches may reduce maximum wattage as shown in the chart
below.
Example: If you have two dimmers ganged together and you have two 24 W bulbs installed (total
CFL Wattage = 48 W), on one dimmer, you may add up to 300 W of incandescent or halogen
lighting to that one dimmer. Repeat the exercise for the other dimmer with which it is ganged.
Total CFL / LED Wattage
Total Incandescent / Halogen Wattage
A
Not Ganged
B
End of Gang
C
Middle of Gang
Neutral
Connection
RRD-6CL
1,2
0 W + 50 W – 600 W Or 50 W – 500 W Or 50 W – 400 W No
1 W – 25 W + 0 W – 500 W Or 0 W – 400 W Or 0 W – 300 W
26 W – 50 W + 0 W – 400 W Or 0 W – 300 W Or 0 W – 200 W
51 W – 75 W + 0 W – 300 W Or 0 W – 200 W Or 0 W – 100 W
76 W – 100 W + 0 W – 200 W Or 0 W – 100 W Or 0 W – 50 W
101 W – 125 W + 0 W – 100 W Or 0 W – 50 W Or 0 W
126 W – 150 W + 0 W Or 0 W Or 0 W
RRD-PRO
0 W + 5 W
3
– 500 W Or 5 W
3
– 400 W Or 5 W
3
– 300 W Optional
1 W – 50 W + 0 W – 400 W Or 0 W – 300 W Or 0 W – 200 W
51 W – 100 W + 0 W – 300 W Or 0 W – 200 W Or 0 W – 100 W
101 W – 150 W + 0 W – 200 W Or 0 W – 100 W Or 0 W
151 W – 200 W + 0 W – 100 W Or 0 W Or 0 W
201 W – 250 W + 0 W Or 0 W Or 0 W
1
Dimmer Load Type -6CL is designed for use with permanently-installed incandescent, CFL, LED, MLV, or tungsten halogen only.
Do not install dimmers to control receptacles or motor-operated appliances.
2
Do not mix CFL and LED loads with MLV loads.
3
Minimum load shown is for neutral connected operation. If no neutral is used, minimum load is 2 bulbs CFL / LED , or 25 W
Incandescent / Halogen.
A B B B C B