Cut Sheet
Lutron®
|
1www.lutron.com/radiora2
product specifications
9.01.11
369-228e
RadioRA® 2 Hybrid Keypads function as a dimmer and keypad combined
into a single device. Hybrid Keypads are great for retro-fit applications
since they eliminate the need to install two separate devices.
RadioRA
® 2 Hybrid Keypads have an available neutral wire terminal that
allows them to be installed in either two-wire or neutral wire installations.
Connecting the neutral wire to a Hybrid Keypad allows a lower minimum
load to be used. Also, normal keypad operation will be available even if the
attached load is not installed or if the lamp is burned out. If a neutral wire is
available in the wallbox it should be connected to the silver teminal on the
Hybrid Keypad. If a neutral wire is not available and not desired, then the
silver terminal should be tightened without any wires connected to it. Hybrid
Keypads can be installed in either single location or multi-location (with
Remote Dimmer) installations.
RadioRA
® 2
Hybrid Keypads can be controlled as part of a lighting control
system and incorporate advanced features such as fade on / fade off and
rapid full on.
RadioRA® 2 Hybrid Keypads feature large, easy-to-use buttons, plus a
unique backlit engraving option that makes them readable any time of the
day or night. The Hybrid Keypad buttons are rounded, allowing engraving
to be displayed at an upward angle, increasing readability. RadioRA
® 2
Hybrid Keypads include a Front Accessible Service Switch (FASS
™
) for
safe lamp replacement.
Use only Lutron® Designer (Claro® or Satin Colors®) wallplates. The
mechanical design of the keypad is ONLY compatible with Lutron
® wallplates
and is NOT compatible with any other manufacturer’s wallplate. Wallplates
are sold separately. Lutron
® Claro® and Satin Colors® wallplates snap on with
no visible means of attachment. Replacement Kits are available in a variety of
colors and with custom engraving to identify clearly each button’s function.
RadioRA® 2 Hybrid Keypads
Model Numbers
RRD-H1RLD-XX
1
RKD-H1RLD-XX
1
-E
Dual Group with Raise/Lower Keypad and 450 W/450 VA Two-wire or Neutral
Wire Dimmer 120~ (Incandescent / Halogen / Magnetic Low-Voltage)
Engraved Replacement Kit
RRD-H2RLD-XX
1
RKD-H2RLD-XX
1
-E
Dual Group with Dual Raise/Lower Keypad and 450 W/450 VA Two-wire or
Neutral Wire Dimmer 120~ (Incandescent / Halogen / Magnetic Low-Voltage)
Engraved Replacement Kit
RRD-H3BSRL-XX
1
RKD-H3BSRL-XX
1
-E
3 Button with Raise/Lower Keypad and 450 W/450 VA Two-wire or Neutral Wire
Dimmer 120~ (Incandescent/ Halogen / Magnetic Low-Voltage)
Engraved Replacement Kit
RRD-H4S-XX
1
RKD-H4S-XX
1
-E
4 Scene with Raise/Lower Keypad and 450 W/450 VA Two-wire or Neutral Wire
Dimmer 120~ (Incandescent/ Halogen / Magnetic Low-Voltage)
Engraved Replacement Kit
RRD-H5BRL-XX
1
RKD-H5BRL-XX
1
-E
5 Button with Raise/Lower Keypad and 450 W/450 VA Two-wire or Neutral Wire
Dimmer 120~ (Incandescent / Halogen / Magnetic Low-Voltage)
Engraved Replacement Kit
RRD-H6BRL-XX
1
RKD-H6BRL-XX
1
-E
6 Button with Raise/Lower Keypad and 450 W/450 VA Two-wire or Neutral Wire
Dimmer 120~ (Incandescent / Halogen / Magnetic Low-Voltage)
Engraved Replacement Kit
RD-RD-XX
1
Remote Dimmer for multi-location installations
1
“XX” in the model number represents color/finish code. See Colors and Finishes on page 7.
Hybrid Keypads
Remote Dimmer
RD-RD
RRD-H5BRL RRD-H6BRL
RRD-H4SRRD-H3BSRL
RRD-H2RLDRRD-H1RLD