Cut Sheet

product specifications
09.25.15369968a
RadioRA® 2 C
•
L® Hybrid Keypads
1 Technical Support: 1.800.523.9466 (U.S.A)www.lutron.com
RadioRA® 2 C
•
L® Hybrid Keypads function as
a dimmer and keypad combined into a single
device. C
•
L® Hybrid Keypads are great for
retro-fit applications since they eliminate the
need to install two separate devices.
C
•
L® Hybrid Keypads are neutral-wire controls
that can be used with small loads, such as
screw-in CFL/LED lamps. Normal keypad
operation will be available even if the attached
load is not installed or the lamp is burned out.
C
•
L® Hybrid Keypads can be controlled as
part of a lighting control system and
incorporate advanced features such as fade
on / fade off and rapid full on.
C
•
L® Hybrid Keypads feature large,
easy-to-use buttons, plus a unique backlit
engraving option that makes them readable
any time of the day or night. The C
•
L® Hybrid
Keypad buttons are rounded, allowing
engraving to be displayed at an upward angle,
increasing readability. C
•
L® Hybrid Keypads
include a Front Accessible Service Switch
(FASSTM) for safe lamp replacement.
Use only Lutron® Designer (Claro® or
SatinColors®) wallplates. The mechanical
design of the keypad is compatible with
Lutron® wallplates ONLY and is NOT
compatible with any other manufacturer’s
wallplate. Wallplates are sold separately.
Lutron® Claro® and SatinColors® wallplates
snap on with no visible means of attachment.
Replacement Button Kits are available in a
variety of colors and with custom engraving to
identify clearly each button’s function.
C
•
L® Hybrid Keypads are designed for use
with permanently installed incandescent,
tungsten halogen, CFL/LED, magnetic
low-voltage, or Lutron® Hi-lume® A-Series LTE
LED drivers only.
RD-RD
RRD-HN5BRL
RRD-HN6BRL
RRD-HN3S RRD-HN4S
RRD-HN3BSRLRRD-HN2RLDRRD-HN1RLD
C
•
L® Hybrid Keypads