Installation Manual

15
Lutron integration protocol
SYSTEM Command Formats
SYSTEM Command-specific fields
Action Numbers and Parameters:
Action Action Number Parameters
Set (#) or Get (?) Time
1
1 Time in: SS.ss, SS, MM:SS, or HH:MM:SS
Set (#) or Get (?) Date 2 Date in MM/DD/YYYY
Set (#) or Get (?) Latitude
and Longitude
4
Latitude = –90.00 to +90.00 degrees
Longitude = –180.00 to +180.00 degrees
Set (#) or Get (?) Time
Zone
2
5 Hours = –12 to 12
Minutes = 0 to 59
Get (?) Sunset 6 None
Get (?) Sunrise 7 None
Get (?) OS Rev 8 None
Set (#) Load Shed
3
11 0 = Disabled
1 = Enabled
NOTES
1. The system time must be entered in 24 hour format.
2. The Time Zone is referenced to GMT.
3. Load Shed commands available only on Quantum version 2.0 and higher.
Example SYSTEM Messages
Operation Command String
Execute: #SYSTEM, Action Number, Parameters
Set time to 5:45 PM. #SYSTEM,1,17:45<CR><LF>
Set date to June 1, 2009. #SYSTEM,2,06/01/2009<CR><LF>
Query: ?SYSTEM, Action Number
What is the system time? ?SYSTEM,1<CR><LF>
What is the system date? ?SYSTEM,2<CR><LF>
Response: ~SYSTEM, Action Number, Parameters
The system time is 11:05 AM. ~SYSTEM,1,11:05:00<CR><LF>
The system date is July 3, 2009. ~SYSTEM,2,07/03/2009<CR><LF>
Use “SYSTEM Command-specific fields” tables to
complete these command fields.
Operation
Command
#SYSTEM, Action Number, Parameters
Integrator’s Reference (continued)
SYSTEM
1
: Command Summary
SYSTEM Command provides support for location, device and system specific information
(e.g., Date, Time, Software Version Numbers).
NOTE
1. Not supported in QS Standalone.