Installation Manual

22
Lutron integration protocol
RESET Command Formats
RESET Command-specific fields
Action Numbers:
Action Action Number
Set (#) restart the device 0
Set (#) restore to factory defaults 1
Set (#) restore to factory defaults (does not affect the
IP address, Gateway address, subnet mask settings)
2
Example RESET Commands
Operation Command String
Execute: #RESET, Action Number
Restart the NWK #RESET,0<CR><LF>
Restore NWK to factory defaults #RESET,1<CR><LF>
Use “RESET Command-specific fields” tables
to complete these command fields.
Operation
Command
#RESET, Action Number
QS Standalone (continued)
System Commands (continued)
RESET Commands