Installation Manual

62
Lutron integration protocol
Assembled in U.S.A.
50015757 Rev. A
GCU-HOSP
Guestroom Control Unit
+ 44.(0)20.7680.4481
+ 1.800.523.9466
lutron.com
243C IND. CONT. EQ.
IEC PELV / NEC Class 2
®
Why Integrate with a myRoom Processor?
• Integrating with a myRoom Processor provides integration over Ethernet without the need for
additional equipment or interfaces.
• RS-232 integration can also be accomplished using third party Ethernet to RS-232 adapters.
• Integrating directly with the myRoom Processor also provides the greatest bandwidth port into the
myRoom plus system.
• Integration IDs are automatically generated by the myRoom plus software application (e.g., for
devices, outputs, shadegroups, timeclocks). Integration IDs can be removed to reduce processing
and traffic of unwanted messages.
• Phantom Keypads allow for integration functionality to be organized on various virtual keypads that
have unlimited buttons and do not count towards link device count limits.
Integration Capabilities
• Control and monitoring of output devices such as dimmers, the GRAFIK Eye, shades and contact closure
outputs
• Control and monitoring of physical or phantom keypad buttons and button status LEDs
• Control and monitoring of Lutron HVAC equipment
• Control and monitoring of individual timeclocks
• Control and monitoring of state variables
• Monitoring of occupancy sensors
• Control and monitoring of areas to activate scenes and monitor occupancy
myRoom plus (continued)
Integration Access Points
myRoom Processor
Model: GCU-HOSP
Continued on next page…