Installation Manual

72
Lutron integration protocol
INTEGRATION ID Command-specific fields
Action Numbers and Parameters:
Description Action Number Parameters
Get (?) Integration ID for a Serial
Number
1
1 Serial Number = 8 character HEX serial number of the device
Get (?) Info from ID
1
3 Integration ID
Note: If this field is left blank, all integration IDs will be printed.
Example INTEGRATION ID Commands
Operation Command String
Query: ?INTEGRATIONID, Action Number, Parameters
Get the Integration ID for a serial number ?INTEGRATIONID,1,5678EFEF<CR><LF>
Response: ~INTEGRATIONID, Action Number, Parameters
Get the Integration ID for a serial number ~INTEGRATIONID,1,5678EFEF,1<CR><LF>
Query: ?INTEGRATIONID, Action Number, Parameters
Get information about an Integration ID
command
?INTEGRATIONID,3,1<CR><LF>
Response: ~INTEGRATIONID, Action Number, Parameters
Get information about an Integration ID
command
~INTEGRATIONID,3,1,DEVICE,5678EFEF<CR><LF>
myRoom plus (continued)
System Commands (continued)
INTEGRATION ID Commands
INTEGRATION ID Command Formats
Use “INTEGRATIONID Command-specific fields” tables
to complete these command fields.
Operation
Command
?INTEGRATIONID, Action Number, Parameters
Continued on next page…
Assembled in U.S.A.
50015757 Rev. A
GCU-HOSP
Guestroom Control Unit
+ 44.(0)20.7680.4481
+ 1.800.523.9466
lutron.com
243C IND. CONT. EQ.
IEC PELV/NEC Class 2
®
NOTE
1. Refer to the integration report generated by the Lutron Designer Tool to identify the integration IDs for devices.