Installation Manual

132
DEVICE Command Formats
Use “DEVICE Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
#DEVICE, 5, Component Number, Action Number, Parameters
DEVICE Command-specific fields
Action Numbers and Parameters:
Applicable
Operations
(#, ?, ~)
Action Action
Number
Parameter Description Format
#, ~ Press/Close 3 None
#, ~ Release/Open 4 None
#, ~ Hold 5 None
#, ~ Multi-tap 6 None
All Set or Get
Current Scene
7 Scene
All Set (#) or Get
(?) LED State
9 LED state New state to set
the LED
0 = Off,
1 = On
2 = Normal Flash
3 = Rapid Flash
All Set or Get
Light Level
14 1 Level Level that the out-
put will fade to
1
0 - 100 or
0.00 - 100.00
2 Fade
time
(optional)
Time the output
should take to get
from current level
to new level
seconds,
seconds.fractions
2
,
minutes:seconds,
hours:minutes:seconds
3 Delay
time
(optional)
Time to wait
before beginning
to fade
seconds,
seconds.fractions
2
,
minutes:seconds,
hours:minutes:seconds
All Set or Get
Zone Lock
15 State State of zone lock 0 = Off
1 = On
All Set or Get
Scene Lock
16 State State of scene
lock
0 = Off
1 = On
All Set or Get
Sequence
State
17 State State of the
automatic
sequence
0 = Off,
1 = Scenes 1-4
2 = Scenes 5-16
# Raise 18 None
# Lower 19 None
# Stop 20 None
Programmer's Reference Appendix
DEVICE Command Summary
Device integration commands allow the user to access components of the system such as a
physical device. The user can activate programming via button presses, releases, etc., as well
as monitor those same events as they occur in real time in the system.