Installation Manual

15
Lutron® integration protocol
MONITORING Command Formats
MONITORING Command-specific fields
•
Monitoring Type:
Description Monitoring Type
Diagnostic Monitoring 1
Event Monitoring 2
Button Monitoring 3
Zone Monitoring 5
Scene # 8
Reply State
(if disabled, all messages FROM the integration access point will cease)
11
Prompt State (if disabled, the prompt will not be printed to the terminal) 12
Set or Get State of All Monitoring
(except Reply and Prompt)
255
•
Action Numbers:
Action Action Number
Enable 1
Disable 2
Example MONITORING Commands
Operation Command String
Execute: #MONITORING, Monitoring Type, Action Number
Disable Diagnostic Monitoring. #MONITORING,1,2<CR><LF>
Enable Zone Monitoring. #MONITORING,5,1<CR><LF>
Query: ?MONITORING, Monitoring Type
Is Button Monitoring disabled? ?MONITORING,3<CR><LF>
Response: ~MONITORING, Monitoring Type, Action Number
Button Monitoring is enabled. ~MONITORING,3,1<CR><LF>
Use “MONITORING Command-specific fields” tables
to complete these command fields.
Operation
Command
#MONITORING, Monitoring Type, Action Number
QSE-CI-NWK-E: MONITORING Commands
Con/Act
FD/Col
DATA RX
DATA TX
RS232 RX
RS232 TX
LNK/ACT
PWR
1 2 3 4
1 2 3 4 5 6 7 8
QSE-CI-NWK-E
24 V 100 mA
800.523.9466
1.610.282.3800
www.lutron.com/qs
QS Link
QS Standalone System Commands