Installation Manual
Table Of Contents
- Table of Contents
- About Integration
- Stanza
- QS Standalone
- RadioRA 2
- Quantum
- HomeWorks QS
- Devices
- Stanza Keypads
- Tabletop Stanza Keypads
- Stanza Dimmers
- Stanza Switch
- Stanza Lamp Module
- Stanza Input/Output Interface
- GRAFIK Eye QS
- Energi Savr Node QS/DALI
- Energi Savr Node QS/Int'l 0-10V
- Energi Savr Node QS/EcoSystem
- Energi Savr Node QS/0-10V
- seeTouch QS Keypads
- seeTouch QS Int'l Keypads
- Sivoia QS Shades
- Sivoia QS Venetian Blinds
- Maestro Dimmers
- Hybrid Keypad
- Tabletop seeTouch Keypads
- Pico Wireless Controls
- Visor Control Receiver
- Radio Powr Savr
- HVAC Controller
- Wireless Temperature Sensor
- Dynamic Keypad
- Programmers Appendix
- Contact Information
18
Lutron® integration protocol
DETAILS Command Formats
Example DETAILS String
Operation Command String
Query: ?DETAILS, ID
Get details of the device with serial ID number
00AC123D
?DETAILS,00AC123D<CR><LF>
Response: ~DETAILS, Serial Number, Name, Family, Model, Software Rev., Boot Software Rev.
The device with serial ID number 00AC123D
has the following information:
Name = GRAFIK Eye 1
Product Family = GRAFIK Eye
Product Model = QSG
Software Revision = 1.70
Boot Code Software Revision = 2
~DETAILS,SN:00AC123D,IntegrationID:GRAFIK
Eye1,Family:GRAFIK_Eye(2),Product:QSG(1),
CODE:1.70,Boot:2.1,HW:1.1<CR><LF>
NOTE
1.
Device ID may be entered as the serial ID number or the Integration ID. Use ALL_DEVICES or
FFFFFFFF to query all devices on the link.
Operation
Command
?DETAILS, ID
1
QSE-CI-NWK-E: DETAILS String
Con/Act
FD/Col
DATA RX
DATA TX
RS232 RX
RS232 TX
LNK/ACT
PWR
1 2 3 4
1 2 3 4 5 6 7 8
QSE-CI-NWK-E
24 V 100 mA
800.523.9466
1.610.282.3800
www.lutron.com/qs
QS Link
QS Standalone System Commands (continued)