Installation Manual

30
Lutron® integration protocol
Why Integrate with a Quantum System
•
Compatible with Quantum System version 1.7 or higher
•
Gain access to system only information
•
Activate System Area scenes
•
Set levels for System Outputs
•
Activate System Shade Group presets
•
View and modify parameters of a Quantum System, such as time, date, time zone, etc.
Command Types
Operation characters will be followed by command types.
•
AREA allows control of an area in the Quantum System. Scenes can be activated, occupancy
monitored etc.
•
SHADEGRP allows control of shade groups in the Quantum System. Shade Groups are collections
of shades that operate in unison
•
OUTPUT allows control and monitoring of a Quantum System output group such as a lighting zone
or closure output.
•
SYSTEM allows setting and controlling system parameters and variables
•
HELP displays usage information for the supported commands and their corresponding actions
•
INTEGRATION ID allows querying integration IDs of devices in the system
Quantum® - System Overview
The Quantum System is Lutron’s premier commercial light control system. It allows the control and
monitor of individual devices and outputs as well as allowing control of entire areas, shade groups
or other portions of the system. The Quantum System includes QS devices such as the GRAFIK
Eye
® QS and Sivoia® QS shades as well as Lutron’s EcoSystem® Ballasts and GRAFIK Dimming
panels. When integrating with a Quantum System the integrator gets additional access to portions
of a the system not available when using products in stand-alone mode, particularly the ability to
activate scenes on an area-by-area basis and to control the position of and activate presets on
entire groups of shades at once.
Quantum System Device Compatibility Index:
Quantum
GRAFIK Eye QS

seeTouch
® QS

Sivoia QS Shade

QS Input/Output Interface

Energi Savr Node
TM QS / DALI

Energi Savr Node QS / Int'l 0-10V

Energi Savr Node QS / EcoSystem

Energi Savr Node QS / 0-10V
