Installation Manual
Table Of Contents
- Table of Contents
- About Integration
- Stanza
- QS Standalone
- RadioRA 2
- Quantum
- HomeWorks QS
- Devices
- Stanza Keypads
- Tabletop Stanza Keypads
- Stanza Dimmers
- Stanza Switch
- Stanza Lamp Module
- Stanza Input/Output Interface
- GRAFIK Eye QS
- Energi Savr Node QS/DALI
- Energi Savr Node QS/Int'l 0-10V
- Energi Savr Node QS/EcoSystem
- Energi Savr Node QS/0-10V
- seeTouch QS Keypads
- seeTouch QS Int'l Keypads
- Sivoia QS Shades
- Sivoia QS Venetian Blinds
- Maestro Dimmers
- Hybrid Keypad
- Tabletop seeTouch Keypads
- Pico Wireless Controls
- Visor Control Receiver
- Radio Powr Savr
- HVAC Controller
- Wireless Temperature Sensor
- Dynamic Keypad
- Programmers Appendix
- Contact Information
31
Lutron® integration protocol
Con/Act
FD/Col
DATA RX
DATA TX
RS232 RX
RS232 TX
LNK/ACT
PWR
1 2 3 4
1 2 3 4 5 6 7 8
QSE -C I- NWK -E
24 V 100 mA
800.523.9466
1.610.282.3800
www.lutron.com/qs
QS Link
Con/Act
FD/Col
DATA RX
DATA TX
RS232 RX
RS232 TX
LNK/ACT
PWR
1 2 3 4
1 2 3 4 5 6 7 8
QSE-CI-NWK-E
24 V 100 mA
800.523.9466
1.610.282.3800
www.lutron.com/qs
QS Link
Why Integrate with a QSE-CI-NWK-E?
•
Integrates a QS lighting control system with a PC or other digital equipment that supports RS232
or Ethernet TCP/IP connection
•
Allows monitor and control of system devices. For example, the QSE-CI-NWK-E can be used to
simulate button presses, report button presses, monitor LEDs, and control light levels.
Additional Commands
•
MONITORING specifies what type of messages the system will report
•
ETHERNET modifies the Ethernet configurations of the QSE-CI-NWK-E
•
RESET restarts the QSE-CI-NWK-E or restores it to factory defaults
•
INTEGRATION ID assigns IDs to devices, so that they may be referred to in a more logical fashion
•
DETAILS returns information about a QS device
•
ERROR reports syntax errors in an integration string command or query
Quantum® Integration Access Points
Network Interface
Model: QSE-CI-NWK-E