Installation Manual

43
Lutron® integration protocol
HELP Command Formats
Operation
Command
?HELP, Command Name
1
, Action Number
2
Example HELP Messages
Operation Command String
Query: #HELP, Command Name, Action Number
What are all the supported Integration
Commands?
?HELP<CR><LF>
What actions are available for #OUTPUT? ?HELP,#OUTPUT<CR><LF>
How is “Raise” used for #OUTPUT? ?HELP,#OUTPUT,2<CR><LF>
Response: ~HELP, Help Information
The list of all Integration Commands. #OUTPUT,?OUTPUT,#DEVICE,?DEVICE,#AREA,
?AREA,#TIMECLOCK,?TIMECLOCK,#SYSTEM,
?SYSTEM,#MONITORING,?MONITORING,
<CR><LF>
The help information for the #OUTPUT
command.
~HELP, #OUTPUT requires action<1-
6><CR><LF>
1 = Set Level/Position
2 = Raise
3 = Lower
4 = Stop Raise/Lower
6 = Pulse
USAGE: #OUTPUT, <ID>, <action>,<CR><LF>
The help information for the “Raise” action
(#OUTPUT).
~HELP, #OUTPUT, <action=2> start raising
output level<CR><LF>
USAGE: #OUTPUT, <ID>,
<action=2><CR><LF>
NOTES
1. The “Command Name” parameter is optional. If not entered, a list of all the supported Integration
Commands will be printed. If a supported command name is entered, the corresponding actions
will be listed.
2. The “Action” parameter is optional. When a valid action number is entered (i.e. it is supported
by the corresponding “Command Name”), the help information for that particular action will be
displayed.
Quantum® System Commands (continued)
QSE-CI-NWK-E: HELP Commands
Con/Act
FD/Col
DATA RX
DATA TX
RS232 RX
RS232 TX
LNK/ACT
PWR
1 2 3 4
1 2 3 4 5 6 7 8
QSE-CI-NWK-E
24 V 100 mA
800.523.9466
1.610.282.3800
www.lutron.com/qs
QS Link