Installation Manual

45
Lutron® integration protocol
Why Integrate with the HomeWorks QS Processor?
•
Integrating with a HomeWorks QS Processor provides integration over Ethernet without the need
for additional equipment or interfaces.
•
RS-232 integration can also be accomplished using third party Ethernet to RS-232 adapters.
•
Integrating directly with the HomeWorks QS Processor also provides the greatest bandwidth port
into the HomeWorks QS system.
•
Integration IDs are automatically generated by the HWQS software application (e.g. for devices,
outputs, shadegroups, time clocks, etc). Integration IDs can be removed to reduce processing and
traffic of unwanted messages.
•
Phantom Keypads allow for integration functionality to be organized on various virtual keypads that
have unlimited buttons and do not count towards link device count limits.
Integration Capabilities
•
Control and monitoring of output devices such as dimmers, grafik eyes, shades and contact
closure outputs.
•
Control and monitoring of physical or phantom keypad buttons and button status LEDs.
•
Control and monitoring of Lutron HVAC equipment.
•
Control and monitoring of individual time clocks.
•
Control and monitoring of state variables.
•
Monitoring of occupancy sensors.
•
Control and monitoring of areas to activate scenes and monitor occupancy.
HomeWorks® QS Integration Access Points
HomeWorks QS Processor
Model: HQP6-2-120