Installation Manual

49
Lutron® integration protocol
SHADEGRP Command Formats
Use “SHADEGRP Command-specific fields” tables
to complete these command fields.
Operation
Command
#SHADEGRP
1
, 2, Action Number, Parameters
Integration ID (example)
SHADEGRP Command-specific fields
Action Numbers and Parameters:
Action Action Number Parameters
Set (#) or Get (?) Shade
Group Level
1 Level
2
= 0–100 or 0.00–100.00,
Delay
2
in SS.ss
4
, SS, MM:SS, or HH:MM:SS
4
Raise
4
2 None
Lower
4
3 None
Stop Raise/Lower 4 None
Set (#) or Get (?)
Current Preset
6 Preset Number
6
= 0-30
Set (#) Venetian Tilt 14 Level
1
= 0–100 or 0.00–100.00,
Fade
2
in SS.ss, SS, MM:SS, or HH:MM:SS
3
Delay
2
in SS.ss, SS, MM:SS, or HH:MM:SS
3
Set (#) Lift and Tilt for
venetians
15 Lift
1
= 0–100 or 0.00–100.00,
Tilt
1
= 0–100 or 0.00–100.00,
Fade
2
in SS.ss, SS, MM:SS, or HH:MM:SS
3
Delay
2
in SS.ss, SS, MM:SS, or HH:MM:SS
3
Raise (#) Tilt 16 None
Lower (#) Tilt 17 None
Stop Tilt (#) 18 None
Raise Lift (#) 19 None
Lower Lift (#) 20 None
Stop Lift (#) 21 None
HomeWorks® QS System Commands (continued)
HQP6-2-120: SHADEGRP Commands