Installation Manual

58
Lutron® integration protocol
ETHERNET Command Formats
ETHERNET Command-specific fields
•
Configuration Number
Description Config. Number Parameters
Get (?) or Set(#) IP Address 0 Address (XXX.XXX.XXX.XXX)
Get (?) or Set (#) Gateway
Address
1 Address (XXX.XXX.XXX.XXX)
Get (?) or Set (#) Subnet
Mask
2 Address (XXX.XXX.XXX.XXX)
Get (?) DHCP 4 None
Get (?) or Set (#) Multicast
address
5 Address (XXX.XXX.XXX.XXX)
Example ETHERNET Commands
Operation Command String
Execute: #ETHERNET, Configuration Number, Parameters
Set IP Address to 192.168.250.1 #ETHERNET,0,192.168.250.1<CR><LF>
Set Gateway Address to 10.2.4.1 #ETHERNET,1,10.2.4.1<CR><LF>
Query: ?ETHERNET, Configuration Number, Parameters
What is the IP Address? ?ETHERNET,0<CR><LF>
Response: ~DEVICE, Integration ID, Configuration Number, Parameters
The IP Address is 192.168.250.1 ~ETHERNET,0=,192.168.250.1<CR><LF>
Use “ETHERNET Command-specific fields” tables to
complete these command fields.
Operation
Command
#ETHERNET, Configuration Number, Parameters
HQP6-2-120: ETHERNET Commands
HomeWorks
® QS System Commands (continued)