Installation Manual
Table Of Contents
- Table of Contents
- About Integration
- Stanza
- QS Standalone
- RadioRA 2
- Quantum
- HomeWorks QS
- Devices
- Stanza Keypads
- Tabletop Stanza Keypads
- Stanza Dimmers
- Stanza Switch
- Stanza Lamp Module
- Stanza Input/Output Interface
- GRAFIK Eye QS
- Energi Savr Node QS/DALI
- Energi Savr Node QS/Int'l 0-10V
- Energi Savr Node QS/EcoSystem
- Energi Savr Node QS/0-10V
- seeTouch QS Keypads
- seeTouch QS Int'l Keypads
- Sivoia QS Shades
- Sivoia QS Venetian Blinds
- Maestro Dimmers
- Hybrid Keypad
- Tabletop seeTouch Keypads
- Pico Wireless Controls
- Visor Control Receiver
- Radio Powr Savr
- HVAC Controller
- Wireless Temperature Sensor
- Dynamic Keypad
- Programmers Appendix
- Contact Information
60
Lutron® integration protocol
HQP6-2-120: RESET Commands
RESET Command Formats
RESET Command-specific fields
•
Action Numbers:
Action Action Number
Resets the HomeWorksR QS processor 0
Example RESET Commands
Operation Command String
Execute: #RESET, Action Number
Reset the HomeWorksR QS processor #RESET,0<CR><LF>
Use “RESET Command-specific fields” tables to
complete these command fields.
Operation
Command
#RESET, Action Number
HomeWorks® QS System Commands (continued)