Installation Manual

76
Lutron® integration protocol
DEVICE Command-specific fields
•
Component Number:
Component Component Number Available Actions
Zone 1 Controller -
Zone 24 Controller
1-24 Raise, Lower, Stop, Set Light Level
Scene 1 Button 70 Press, Release
Scene 2 Button 71 Press, Release
Scene 3 Button 76 Press, Release
Scene 4 Button 77 Press, Release
Scene Off Button 83 Press, Release
Shade Column 1 Open 38 Press, Release
Shade Column 1 Preset 1 39 Press, Release
Shade Column 1 Close 40 Press, Release
Shade Column 1 Lower 41 Press, Release
Shade Column 1 Raise 47 Press, Release
Shade Column 2 Open 44 Press, Release
Shade Column 2 Preset 1 45 Press, Release
Shade Column 2 Close 46 Press, Release
Shade Column 2 Lower 52 Press, Release
Shade Column 2 Raise 53 Press, Release
Shade Column 3 Open 50 Press, Release
Shade Column 3 Preset 1 51 Press, Release
Shade Column 3 Close 56 Press, Release
Shade Column 3 Lower 57 Press, Release
Shade Column 3 Raise 58 Press, Release
Scene Controller 141 Set Current Scene, Set Zone Lock, Set Scene
Lock, Set Sequence State, Raise, Lower, Stop
Scene 1 LED 201
Get (?) LED state
Scene 2 LED 210
Get (?) LED state
Scene 3 LED 219
Get (?) LED state
Scene 4 LED 228
Get (?) LED state
Scene Off LED 237
Get (?) LED state
GRAFIK Eye® QS: DEVICE Commands
DEVICE Command Formats
Use “DEVICE Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
#DEVICE, 5, Component Number, Action Number, Parameters
Continued on next page...
1 2 3 4 5 6
Scene 1
OK
Fade Time
03 Seconds