Installation Manual

97
Lutron® integration protocol
seeTouch® Keypads: DEVICE Commands
•
Action Numbers and Parameters:
Action Action Number Parameters
Press 3 None
Release 4 None
Hold 5 None
1
Multi-tap 6 None
1
Set (#) or Get (?) LED
State
2
9 0=Off
1=On
2=Normal-Flash: 1 flash every second
1
3=Rapid-Flash: 10 flashes every second
1
Example DEVICE Commands
Examples presume keypad has been assigned Integration ID 2.
Operation Command String
Execute: #DEVICE, Integration ID, Component Number, Action Number, Parameters
Press Button 1. #DEVICE,2,1,3<CR><LF>
Turn on LED 5. #DEVICE,2,85,9,1<CR><LF>
Query: ?DEVICE, Integration ID, Component Number, Action Number
What is the state of LED 1? ?DEVICE,2,81,9<CR><LF>
Response: ~DEVICE, Integration ID, Component Number, Action Number, Parameters
LED 1 is on. ~DEVICE,2,81,9,1<CR><LF>
NOTES
1
Only available on seeTouch QS units with Quantum®.
2
Quantum only. Set is for unprogrammed buttons only.