Installation Manual

9
Lutron integration protocol
Integrator’s Reference (continued)
GROUP
1
: Command Summary
TheGROUPcommandisusedtoreportthestatusofagroupofoccupancysensors
GROUP Command-specific fields
 Action Numbers:
Action Action Number
Get(?)OccupancyGroupState 3
GROUP Command Format
Use “GROUP Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
?GROUP,6,ActionNumber
Example GROUP Messages
Operation Command String
Query:?GROUP,IntegrationID,ActionNumber
WhatisOccGROUP1’sstatus? ?GROUP,1,3<CR><LF>
Response:~GROUP,IntegrationID,ActionNumber,Parameters
Occgroup1isoccupied ~GROUP,1,3,3<CR><LF>
Occgroup1isunknown ~GROUP,1,3,255<CR><LF>
Occupancy States:
Description Value
Occupied 3
Unoccupied 4
Unknown 255
NOTE
1  NotsupportedinQSStandalone
Continuedonnextpage…