Installation Manual

131
Lutron integration protocol
LUTRON
Devices (continued)
Maestro Dimmer and Plug-In Module (continued)
DEVICECommands
DEVICE Command Format
DEVICE Command-specific fields
 Component Numbers:
Component Component Number Available Actions
MaestroTapSwitch 6 Press,Release,DoubleTap,Hold
Action NumbersandParameters:
Action Action Number Parameters
Set(#)Press 3 None
Set(#)Release 4 None
Set(#)Hold 5 None
Set(#)DoubleTap 6 None
Example OUTPUT Commands
ExamplespresumedimmerhasbeenassignedIntegrationID2
Operation Command String
Execute: #DEVICE,IntegrationID,ComponentNumber,ActionNumber,Parameters
PressButton1 #DEVICE,2,1,3,<CR><LF>
Use “OUTPUT Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
#DEVICE
1
,2,ComponentNumber,ActionNumber,Parameters
NOTE
1  SupportedonlyinHomeWorksQS4 0orhigher
Continuedonnextpage…