Installation Manual

140
Lutron integration protocol
Devices (continued)
Radio Powr Savr Sensor (continued)
DEVICECommands
DEVICE Command Formats
~DEVICE,19,2,ActionNumber
Occupied state component
is always 2 for sensors
Operation
Command
Integration ID (example)
DEVICE Command-specific fields
 Component Numbers:
Component Component Number Available Actions
OccupiedState 2 Occupied,Unoccupied
 Action Numbers:
Action Action Number
Report(~)Occupied 3
Report(~)Unoccupied 4
Example DEVICE Commands
ExamplespresumesensorhasbeenassignedIntegrationID19
Operation Command String
Response: ~DEVICE,IntegrationID,ComponentNumber,ActionNumber,Parameters
RadioPowrSavr19wentoccupied ~DEVICE,19,2,3<CR><LF>
RadioPowrSavr19wentunoccupied ~DEVICE,19,2,4<CR><LF>