Installation Manual

147
Lutron integration protocol
DEVICE Command-specific fields
 Component Numbers:
Component Component Number Available Actions
InternalSensor 17 Gettemperature
RemoteSensor#1 18 Gettemperature
RemoteSensor#2
1
42 Gettemperature
 Action NumbersandParameters:
Action Action Number Parameters
Get(?)SensorTemperature(°F)
2,3
41 None
Get(?)SensorTemperature(°C)
2,3
42 None
1  UsedonlywhenthePalladiomthermostatcontrolsseparateheatingandcoolingzones
2  Thisfunctionreports“UNKNOWN”ifthevalueisnotknown
3  Whenissuingthiscommand,usetheintegrationIDandcomponentnumberofthetemperaturesensor,nottheHVAC
zone
Devices (continued)
Palladiom Thermostat (continued)
DEVICECommands
DEVICE Command Format
Use “DEVICE Command-specific fields”
tables to complete these command fields.
Operation
Command
Integration ID (example)
#DEVICE,21,ComponentNumber,ActionNumber,Parameters