Installation Manual

149
Lutron integration protocol
Devices (continued)
Wireless Temperature Sensor (continued)
DEVICECommands
DEVICE Command Formats
DEVICE Command-specific fields
 Component Numbers:
Component Component Number Available Actions
InternalSensor 1 Getbatterystatus
 Action Numbers and Parameters:
Action Action Number Parameters
Get(?)batterystatus 22 Parameternumberlterscommandresponse:
0=Donotlterresults
1=Get“good”devicesonly
2=Get“bad”devicesonly
3=Getbatterypowereddevicesonly
4=Getallnon-batterypowereddevicesonly
5=Getdeviceswithlowbatteryonly
6=Getallnon-activateddevicesonly
Example DEVICE Messages
Operation Command String
Query: ?DEVICE,IntegrationID,ComponentNumber,ActionNumber
WhatistheTemperatureSensor’sBatteryStatus? ?DEVICE,1,1,22<CR><LF>
Response: ~DEVICE,IntegrationID,ComponentNumber,ActionNumber,Parameters
TemperatureSensor’sBatteryisLow ~DEVICE,1,1,22,2<CR><LF>
Test
Link
Use “DEVICE Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
?DEVICE,1,ComponentNumber,ActionNumber,Parameters