Installation Manual

155
Lutron integration protocol
Devices (continued)
QS Sensor Module (QSM) (continued)
DEVICECommands
DEVICE Command Formats
DEVICE Command-specific fields
 Component Numbers:
Component Component Number Available Actions
WiredOccupancysensors 1 – 4 Occupied,Unoccupied
WirelessOccupancysensors1–10 5–14 Occupied,Unoccupied
Pico1Buttons
1,2
61–65 Press,Release
Pico2Buttons
1,2
82–86 Press,Release
Pico3Buttons
1,2
103–107 Press,Release
Pico4Buttons
1,2
124–128 Press,Release
Pico5Buttons
1,2
145–149 Press,Release
Pico6Buttons
1,2
166–170 Press,Release
Pico7Buttons
1,2
187–191 Press,Release
Pico8Buttons
1,2
208–212 Press,Release
Pico9Buttons
1,2
229–233 Press,Release
Pico10Buttons
1,2
250–254 Press,Release
NOTES
1  AllmodelsexceptPJ2-4B:Picobuttonorder(Top,Favorite,Bottom,Raise,Lower)dictatesComponentNumber(see
Pico1example,below):
Pico 1 Button Sample Component Number
Top 61
Favorite 62
Bottom 63
Raise 64
Lower 65
2  ModelPJ2-4B*only:Picobuttonorderis1,2,3,4andcomponentmappingwillbeasbelow:
Pico 1 Button Sample Component Number
1 61
2 64
3 65
4 63
 *ModelPJ2-4BissupportedonlyonQSMsoftwareversion7 28andhigher
Use “DEVICE Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
#DEVICE,19,ComponentNumber,ActionNumber,Parameters
Continuedonnextpage…