Installation Manual

14
Lutron integration protocol
HELP Command Formats
Example HELP Messages
Operation Command String
Query: ?HELP,CommandName,ActionNumber
WhatareallthesupportedIntegrationCommands? ?HELP<CR><LF>
Whatactionsareavailablefor#OUTPUT? ?HELP,#OUTPUT<CR><LF>
Howis“Raise”usedfor#OUTPUT? ?HELP,#OUTPUT,2<CR><LF>
Response: ~HELP,HelpInformation
ThelistofallIntegrationCommands #OUTPUT,?OUTPUT,#DEVICE,?DEVICE,#AREA,
?AREA,#TIMECLOCK,?TIMECLOCK,#SYSTEM,
?SYSTEM,#MONITORING,?MONITORING,
<CR><LF>
Thehelpinformationforthe#OUTPUTcommand ~HELP, #OUTPUTrequiresaction<1–6><CR><LF>
1=SetLevel/Position
2=StartRaising
3=StartLowering
4=StopRaising/Lowering
6=Pulse
USAGE:#OUTPUT,<ID>,<action>,<CR><LF>
Thehelpinformationforthe“Raise”action(#OUTPUT) ~HELP, #OUTPUT,<action=2>startraising
outputlevel<CR><LF>
USAGE:#OUTPUT,<ID>,<action=2><CR><LF>
Operation
Command
?HELP,CommandName
2
,ActionNumber
3
Integrator’s Reference (continued)
HELP
1
: Command Summary
HELPCommandforaspecicCommandNameprovidescommand-namespecicusage
information
NOTES
1  HELPnotsupportedinQSStandalone
2  The“CommandName”parameterisoptional Ifnotentered,alistofallthesupportedIntegrationCommandswillbe
printed Ifasupportedcommandnameisentered,thecorrespondingactionswillbelisted
3  The“Action”parameterisoptional Whenavalidactionnumberisentered(i e itissupportedbythecorresponding
“CommandName”),thehelpinformationforthatparticularactionwillbedisplayed