Installation Manual

15
Lutron integration protocol
SYSTEM Command Formats
SYSTEM Command-specific fields
 Action NumbersandParameters:
Action Action Number Parameters
Set(#)orGet(?)Time
1
1 Timein:SS ss,SS,MM:SS,orHH:MM:SS
Set(#)orGet(?)Date 2 DateinMM/DD/YYYY
Set(#)orGet(?)Latitude
andLongitude
4 Latitude=–90 00to+90 00degrees
Longitude=–180 00to+180 00degrees
Set(#)orGet(?)Time
Zone
2
5 Hours=–12to12
Minutes=0to59
Get(?)Sunset 6 None
Get(?)Sunrise 7 None
Get(?)OSRev 8 None
Set(#)LoadShed
3
11 0=Disabled
1=Enabled
NOTES
1  Thesystemtimemustbeenteredin24hourformat
2  TheTimeZoneisreferencedtoGMT
3  LoadShedcommandsavailableonlyonQuantumversion2 0andhigher
Example SYSTEM Messages
Operation Command String
Execute: #SYSTEM,ActionNumber,Parameters
Settimeto5:45PM #SYSTEM,1,17:45<CR><LF>
SetdatetoJune1,2009 #SYSTEM,2,06/01/2009<CR><LF>
Query: ?SYSTEM,ActionNumber
Whatisthesystemtime? ?SYSTEM,1<CR><LF>
Whatisthesystemdate? ?SYSTEM,2<CR><LF>
Response: ~SYSTEM,ActionNumber,Parameters
Thesystemtimeis11:05AM ~SYSTEM,1,11:05:00<CR><LF>
ThesystemdateisJuly3,2009 ~SYSTEM,2,07/03/2009<CR><LF>
Use “SYSTEM Command-specific fields” tables to
complete these command fields.
Operation
Command
#SYSTEM,ActionNumber,Parameters
Integrator’s Reference (continued)
SYSTEM
1
: Command Summary
SYSTEMCommandprovidessupportforlocation,deviceandsystemspecicinformation
(e g ,Date,Time,SoftwareVersionNumbers)
NOTE
1  NotsupportedinQSStandalone