Installation Manual

20
Lutron integration protocol
INTEGRATION ID Command Formats
INTEGRATION ID Command-specific fields
 Action Numbers and Parameters:
Description Action Number Parameters
Set(#)orGet(?)IntegrationIDfor
aSerialNumber
1 SerialNumber=8characterHEXserialnumberofthedevice
IntegrationID=TheintegrationIDtobeassigned
Set(#)ChangeIntegrationID 2 CurrentIntegrationID,NewIntegrationID
Note:AnerrorwillbereportedifthenewIntegrationIDisthe
sameasanexistingIntegrationIDinthesystem
Get(?)InfofromID 3 IntegrationID
Note:Ifthiseldisleftblank,allintegrationIDswillbeprinted
Set(#)orGet(?)Output
IntegrationID
4 SerialNumber,ComponentNumber,IntegrationID
Example INTEGRATION ID Commands
Operation Command String
Execute: #INTEGRATIONID,ActionNumber,Parameters
SettheIntegrationIDforaserialnumber #INTEGRATIONID,1,1234ABCD,kitchen dimmer<CR><LF>
Response: ~INTEGRATIONID,ActionNumber,Parameters
SettheIntegrationIDforaserialnumber ~INTEGRATIONID,1,1234ABCD,kitchen dimmer<CR><LF>
Execute: ?INTEGRATIONID,ActionNumber,Parameters
GettheIntegrationIDforaserialnumber ?INTEGRATIONID,1,5678EFEF<CR><LF>
Response: ~INTEGRATIONID,ActionNumber,Parameters
GettheIntegrationIDforaserialnumber ~INTEGRATIONID,1,5678EFEF,living room keypad<CR><LF>
Execute: #INTEGRATIONID,ActionNumber,Parameters
ChangetheIntegrationID #INTEGRATIONID,2,diningroomlights1,diningroomaccents<CR><LF>
Response: ~INTEGRATIONID,ActionNumber,Parameters
ChangetheIntegrationID ~INTEGRATIONID,2,diningroomlights1,diningroomaccents<CR><LF>
Execute: ?INTEGRATIONID,ActionNumber,Parameters
GetinformationaboutanIntegrationID
command
?INTEGRATIONID,3,livingroomkeypad<CR><LF>
Response: ~INTEGRATIONID,ActionNumber,Parameters
GetinformationaboutanIntegrationIDcommand ~INTEGRATIONID,3,livingroomkeypad,DEVICE,5678EFEF<CR><LF>
QS Standalone (continued)
System Commands (continued)
INTEGRATIONIDCommands
Use “INTEGRATIONID Command-specific fields” tables
to complete these command fields.
Operation
Command
#INTEGRATIONID,ActionNumber,Parameters